I have a PowerConnect 5324 along with Server 2003 Enterprise IAS Radius running.

 

I am trying to do port Authentication using EAP-PEAP based on user authentication. So basically when a user logs into a workstation it will automatically authenticate them on the port and also assign them a dynamic vlan.  However I cannot get it to work.

 

If anyone has been succesfull in getting their Dell switch to do port authenication and also assigning dynamic vlans based on EAP-PEAP MSCHAP v. 2 please let me know. I have put a brief description of my settings.

 

I think the problem comes down to assigning dynamic vlans and I have spent over 5 hours on it just try to get it authenicate. I have just the one user in a group I am trying to authenicate with my policy and I am passing the Cisco AV Pair of 2(The VLAN for that user). I also tried passing different attributes like Tunnel Type=VLAN, Tunnel-Prvt-Group-ID=2, and Tunnel Medium Type=802.

 

I am running a PowerConnect 5328

Software Version 2.0.0.40

Boot Version 1.0.2.02

Hardware Version 00.00.02

 

Thanks

Jim