UNSOLVED
dell force s50
Hello everyone I state that I am new to these things. I have a problem with a force of s50 because I can not start it with the lan ports, the status panel shows me the green lights on "OK" and "PWR". I followed the procedures as described on the DELL website with the PUTTY program but without success. Can someone help me? Thank you in advance
DELL-Josh Cr
Community Manager
•
9788 Posts
•
45211 Points
2911
0
Posted February 8th, 2018 10:00
Was it working previously? It sounds like it might not be booting at all. When you connected the console cable did you reboot the switch to see if any of the boot process comes up?
DELL-Josh Cr
Community Manager
•
9788 Posts
•
45211 Points
2876
0
Posted February 8th, 2018 14:00
Can you private message me the service tag?
DELL-Josh Cr
Community Manager
•
9788 Posts
•
45211 Points
2770
0
Posted February 9th, 2018 08:00
If you click the envelope icon next to the login bottom in the top right of the page you can send private messages.
Hi Josh Now I'll explain,
I bought this switch with freshman 6J8R9T1 from a seller on AMAZON about a year and a half ago,
it worked for about a month then I put it away for a year and now I need it but it does not work.
The STACK ID signals green LED on OK and green LED on AC.
The lan ports from 1 to 48 seem to connect but after a while they turn off and nothing happens,
the console lan any cable I insert with or without DB9 does not seem to work. I hope I was clear Thank youDELL-Josh Cr
Community Manager
•
9788 Posts
•
45211 Points
2740
0
Posted February 12th, 2018 09:00
It seems like it may be a hardware issue, but it is out of warranty. You may need to call in and see what support options you have there for out of warranty units.
DELL-Josh Cr
Community Manager
•
9788 Posts
•
45211 Points
2978
0
Posted February 6th, 2018 16:00
Hi,
Have you tried connecting with a console cable? Page 9 http://www.force10networks.com/CSPortal20/KnowledgeBase/DOCUMENTATION/InstallGuidesQuickrefs/S-Series/S50_Quick_Reference2.2.0.pdf