The pstclntsave process checks the STATUS and WORKLIST attributes of the GROUP resource from the server every number of seconds specified in the poll interval to see if the group is running and if client is still included in the WORKLIST. Whenever pstclntsave is aborted, or the time_out condition occurs, or the group's STATUS is not running, or the client is no longer in the WORKLIST (whichever comes first), pst- clntsave performs all the post-processing commands specified in /nsr/res/group.res file, unlinks /nsr/tmp/group.tmp, then records the results (success or failure) in the /nsr/logs/savepnpc.log file.
Note: This is to be invoked by preclntsave program only. It is not meant for users to use.
OPTIONS
-sserver Specifies the controlling server.
-cclient The name of the client where the pre-processing commands will be performed on.
-ggroup Specifies the group name that is being run.
-ppollinterval Specifies how often (in seconds) to poll the server.
-ttimeout The timeout condition in nsr_getdate() format string to start the post-processing commands. This can also be specified in the /nsr/res/group.res file.
-Ddebuglevel For debugging purpose, the debug level could be 1, 2 or 3.
Shubhadip_Datta
26 Posts
1025
1
Posted February 22nd, 2016 03:00
Try to run pstclntsave in debug mode or instead of del command use something else -
pstclntsave -s server -c client -g group [-p pollinterval] [-t timeout]
[-D debuglevel]
DESCRIPTION
OPTIONS