UNSOLVED

rhornsby2

updated

19 years ago

R

rhornsby2

16 Posts

0

342

October 5th, 2007 04:00

HP/UX compression drivers

Guys

Networker 7.2.2 on Hpux 11
Tapelibrary - scaler I2k with LTO2 drives

Error is not compressing on the media.
Inquire output is showing /dev/rmt/bn0 and not cbn0 (which give you the compression)
We simply cannot get those drivers on. We've been through the admin guide and the procedures in there haven't worked.

Are we missing anything obvious, or do you need more info?
Any help wold be greatly appreciated
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    125

    0

    Posted October 5th, 2007 05:00

    On HP you should use either /dev/rmt/cXXtXdXBESTnb or mnb devices. If you use IBM drives then most probably you will need their drivers to enable compression (as they do not use compression despite using device name with compression) - those drivers will create their own device names.

    Do you see those devices when using ioscan?
  • rhornsby2

    16 Posts

    125

    0

    Posted October 9th, 2007 04:00

    Turns out the network card was at fault and the bottleneck inthis situation. It wasn't lack of compression on the drive it was just lack of throughput
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    125

    0

    Posted October 9th, 2007 05:00

    It's funny because you didn't mention throughput anywhere in your original post :D