and random times I get the whole screen flicking off for a second. Sometimes its pretty constant, sometimes very infrequent. It "seems" to happen more when theres a lot changing on the screen, but thats not at all conclusive. Very annoying being limited to VGA cable! I've not tried HDMI yet, not have the cable...
Similar results for me - I only has to untick Alternate DVI Operational Mode - wahoo! Would have found it earlier, but running Win7 Beta and the drivers I was using didnt have those options...
I have 2 Samsung 204B monitors. Only one did this. I swapped monitors/cables, etc. and the problem stayed with the monitor. Possibly since I went in to change the display to make the same monitor that was blinking the main monitor again. So it could be the ATI 3450 graphics card/settings. Thanks for the help. I tried it and so far....no blinking.
I have the ATI HD2400 video card and have the blinking problem. Checking the Reduce DVI frequency on high res displays helped, but still have the occasional blink. Dell support was useless. Even after I explained that the monitor was just new out of the box, they would not help because my computer was out of warranty. The supervisor said they could not open the account without charging me 49 dollars for a one time service charge. Totally useless. I will probably change computer vendors on the next upgrade.
The problem has been resolved. Apparently all DVI cables are not equal. When hooking up the new monitor I did not use the supplied DVI cable but used the one that was on the old monitor. Switching to the supplied cable resolved all problems.
I had the same problem and solved it by using the supplied DVI cable. When I first installed the monitor I simply used the old DVI-D single link cable and had the blinking problem. When I switched to the supplied DVI-D single link cable the monitor performance was flawless. It appears all DVI-D single link cables are not equal.
I had the same problem and solved it by using the supplied DVI cable. When I first installed the monitor I simply used the old DVI-D single link cable and had the blinking problem. When I switched to the supplied DVI-D single link cable the monitor performance was flawless. It appears all DVI-D single link cables are not equal.
PrestonLad
6 Posts
2121
1
Posted January 26th, 2009 13:00
This worked for me.
On the Advanced Setting in the ATI Catalyst Control Centre, Digital Panel (DVI), Attributes -
Tick - Reduce DVI frequency on high res displays
Untick - Alternate DVI operational mode
Apply
No blinking problem now.