Reason line = Dell S2716DG USB ports not working and showing into device manager as "unknown device" with no software to update. hardware id being : USB\VID_0451&PID_8142&REV_0100 Keep saying drivers not installed
Body =
* What is the monitor 20 digit alpha-numeric monitor serial number and A0x revision? S/N: CN-0Y44M5-QDC00-79F-10HU REV A07
* Was the monitor purchased new directly from Dell? Or from a reseller? Reseller (Bpm-Power.it)
* What specific computer model? Personal Computer
* What operating system? Windows 7 ultimate 64 bit
* What specific video card? Zotac 1080 Amp! Extreme
* What video out ports are on the video card? (VGA/DVI/HDMI/DP/mDP)? 3 x DisplayPort 1.4, HDMI 2.0b, DL-DVI
* List all monitor cables and/or adapters attached to the computer and the ports they are using. Displayport and usb cable to the motherboard
* Did you install the DDM (Dell Displays Manager) software? If yes, uninstall it, reboot the computer and retest the monitor. Dunno if it's the one included with the dvd but I can't find this application installed
* What Windows power plan? Example = High performance, PCI-e Link State Off. High Performance, PCI-e always on. No powersaving at all.
* If the monitor is functional in Windows, press the monitor Menu button to open the OSD (On Screen Display). What is the left Resolution and right Maximum? 2560x1440, 144hz , Normal Mode
* Turn the computer and S2716DG off * Disconnect the S2716DG USB upstream cable from the computer and the rear of the S2716DG * Turn the S2716DG on, then the computer
* Run the free Intel Driver Update utility and see if it installs any newer or missing drivers. Once installed, Click Start- Intel Driver Update Utility- Intel Driver Update Utility 2.0. Then click "Auto detect...". When done, restart the computer
* Once restarted, open the Device Manager and verify that there are no bangs or unknown devices. If NONE, leave the Device Manager open * Connect the S2716DG USB upstream cable to the S2716DG, then to the computer. Does the Device Manager show new hardware activity?
Personal Computer * What specific "Personal Computer" model? Is this a "built from parts" desktop computer or an Acer, HP, etc. What specific motherboard and chipset?
* Are the USB ports on the computer blue 3.0 or black 2.0?
* Is there another computer there to test the S2716DG USB on to verify that it works?
* Right click "USB\VID_0451&PID_8142&REV_0100" * Click "Update Driver Software". What happens?
* Right click "USB\VID_0451&PID_8140&REV_0100" * Click "Update Driver Software". What happens?
Hello I've tried to move the monitor to my other computer and there works flawlessly.....
But on the other computer I dunno why the DP port doesn't let monitor just via HDMI.
There with HDMI as soon as i connected my usb key on the monitor usb it recognized it istantly and there are no problems in the device manager as well.
While on my main rig.... nothing to do.
Now at least I can say that monitor work without defects.....
My other rig has win10 LTSB
I'd like to solve this but I will prolly switch to Intel 8th gen rig moving on from this 6th generation
Correct, just connect the S2716DG video cable to the other computer. Reboot. Make sure the resolution is correct and that the driver is installed. Then connect the USB cable and test.
* I opened Google and searched for, "Asus Maximus VIII Ranger chipset drivers" * I then opened the second link, "MAXIMUS VIII RANGER Driver & Tools| Motherboards | ASUS USA" * I chose Windows 7 64-bit * I see two possible applicable drivers for this issue; Chipset Version 11.7.0.1040 USB Version 1.16.33.1 Beta Version
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
6435
0
Posted December 23rd, 2017 12:00
* Turn the computer and S2716DG off
* Disconnect the S2716DG USB upstream cable from the computer and the rear of the S2716DG
* Turn the S2716DG on, then the computer
* Run the free Intel Driver Update utility and see if it installs any newer or missing drivers. Once installed, Click Start- Intel Driver Update Utility- Intel Driver Update Utility 2.0. Then click "Auto detect...". When done, restart the computer
* Once restarted, open the Device Manager and verify that there are no bangs or unknown devices. If NONE, leave the Device Manager open
* Connect the S2716DG USB upstream cable to the S2716DG, then to the computer. Does the Device Manager show new hardware activity?
DELL-Chris M (old account)
#IWork4Dell