UNSOLVED

lancelotspratt

updated

20 years ago

0

9477

July 31st, 2006 17:00

Faulty 2007 WFP replaced by 2007 FP!!!

Well I received a 2007 WFP just over a week ago. It seemed fine at first, then I noticed backlight bleeding into the top left of the screen. THis was very distracting when watching DVDs or playing games. So I contacted Dell Support in the UK and they were fantastic - I received a replacement after five days. However, it's a 2007 FP not WFP!!! What's more, it's got a lot of cosmetic damage alond the top of the bezel as though it's been dropped!!! I phoned Dell Customer Support and they promise to have a proper replacement in two to five days. This is so annoying as I'm going on holiday and am having it delivered to my parents' house. The guy told me that if I waited until I came back it would be too late. Too late for what? I won't be able to test the replacement but if it's faulty I'm sending it back!

What's really annoying is that I did loads of research before buying the 2007 WFP and expected it to be problem free after Dell fixed the banding issue. Oh well, hope the new replacement is alright!

I'd just like to say though that Dell Customer Support in the UK is fantastic - they arranged the replacements very quickly and were very helpful when contacted through email or the telephone.

Why though can't the courier who drops off a monitor collect the old one? I had to stay in until almost 1300 today to collect this and tomorrow I have to be in between 0830 and 1730 to await collection of the old one. My mum is going to have to go through all this as well now!
  • xenithon

    10 Posts

    198

    0

    Posted August 1st, 2006 09:00

    Strange...was your resolution perhaps still set to 1680x1050?

     

  • 198

    0

    Posted August 1st, 2006 09:00

    They are collecting the 2007WFP today so I'm using the 2007FP now. What I'm surprised at is the quality of the image - it's pretty bad. It's nowhere near as good as the 2007WFP - the viewing angle is awful and the focus seems pretty off too. Why then does it cost a lot more?
  • Dufflover

    2 Intern

    •

    429 Posts

    198

    0

    Posted August 1st, 2006 13:00



    @lancelotspratt wrote:
    Why then does it cost a lot more?

    The panel is bigger (1680x1050 < 1600x1200)
  • 198

    0

    Posted August 1st, 2006 17:00

    At first it was still set to 1680x1050 but I changed it to 1600x1200. It just seems less sharp and slightly uneaven. I am using the DVI connector and haven't tried DSUB but surely DSUB would be of lower quality?

    The top of the bezel is quite badly marked so I'm guessing it's been dropped in the factory - so it would have gone back anyway! - and perhaps the electronics have been damaged. I just couldn't understand why someone would pay more for a monitor that is clearly inferior!