
UNSOLVED
H
HonestJohn
1 Message
0
4941
September 15th, 2008 15:00
Dual stand-alone monitors- 1 not recognized
Background:
PC XPS530 with additional video card installed.
Using two generic monitors.
Hard drive crashed.
I replaced it with a new Western SATA hd. Increased size from 160 G to 320 G.
Re-installed Windows XP.
Problem:
On inital boot-up, both monitors came on for less than a second. Then the primary monitor went blank. The monitor plugged into the secondary adapter plug still works.
I can swap one monitor with the other with no problem, so the monitor itself is not the problem (I think).
Device manager tells me that I have only one monitor.
Control panel monitor dialog sees only one monitor. No "screen 1-screen-2" picture.
When I open some utilities (e.g. the audio control) it "flys off" to the second monitor.
So, I suspect that this is not really a monitor problem, but I'm at a loss as to where to start.
Message Edited by HonestJohn on 09-15-2008 12:10 PM
Responses (1)
Solutions (0)

Grey Ferret
50 Posts
301
0
Posted September 15th, 2008 19:00
I would guess that when you re-installed Windows, you didn't re-install the appropriate drivers for your video card. These should have come on their own CD, or should be downloadable from the manufacturer's website.
HTH
Grey Ferret