It seems the 24 suffers from this issue. You will need to turn the power button slightly to get it to operate. This is caused by a small plastic part holding the button in position breaking.
If you do a search on my forum name you should come across a thread explaining the problem and how to fix it. Something along the lines of "once you find the correct position for the button, place a piece of selotape over it to stop it rotating".
As Slammer99uk said - The Power button does not work if the button turns right of left more than 5 degrees. If under warranty, get the monitor replaced by Dell. If out of warranty, take a clear piece of tape and stick it over the button (I pointed to noon) to keep it from rotating.
I had that happen on a 1901. In my case, I fidled with the housing and it snapped back into place...though I was preparred to relace it if it didn't work! Needless to say, I'm a bit more careful with how I push it now, though I haven't had any other issues.
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
360
0
Posted May 13th, 2009 06:00
wrightflyer1903,
No. We would just replace it while under warranty. Is yours under warranty?
DELL-Chris M (old account)
#IWork4Dell