Re: the 2407 AO2 - Made in China - despatched very late June 06 to Australia.
Running a ATI Radeon 9550 on a steam powered 1 GHz Athalon
Anyway - decided to run it on DVI input for a while and occasionally I get horizontal yellow bands appearing on the screen of varying thickness. Turn the monitor off and then back on and all is sweet. Will switch back to VGA input (minimal if no banding). Is there a problem with the DVI circuitry???
It could well be a DVI compliance problem. 24" widescreen is pushing the limits of single link DVI capability. The DVI transmitters in some cards are not up to the task -
I get something very similar, except they are blue lines, and they can also be fixed by turning the monitor off and on.
I also suspect it has to do with the DVI connection. Although I can't fix it, I've tried repositioning the cable, and using different cables, and that seems to at least cause less of these lines. Also, ATI's drivers have an 'alternate dvi' mode, which when turned on and off changes the number of lines visible.
gpro
2 Intern
•
2024 Posts
275
0
Posted July 25th, 2006 14:00
Tom's Hardware: The TFT Connection: Do NVIDIA and ATi Deliver?
ExtremeTech: Making Digital Flat Panels Better
ExtremeTech: DVI Compliance Shootout
Message Edited by gpro on 07-25-200610:06 AM