UNSOLVED

tastysnx

updated

21 years ago

T

tastysnx

4 Posts

0

16449

May 28th, 2006 12:00

1907fp simultaneous VGA and DVI connection

Is it kosher to have two devices, one analog and one digital, connected to the monitor simultaneously and to switch between the two as needed, or are you only supposed to have one device connected at any given time?
  • SR45

    2 Intern

    •

    12138 Posts

    591

    0

    Posted May 28th, 2006 15:00

    Are you talking about two monitors or just one monitor connected to both the inputs  ?  Do not use both inputs for one monitor
     
    Dim 4400
    2.6 Ghz 400 FSB
    1 Gb 2100 DDR memory
    Windows XP SP-2
    17 inch 1703 FP monitor
    6200 AGP
    48x CDRW
    16x DVD-R
    410 watt ( PcPower&Cooling )

    Message Edited by SR45 on 05-28-200601:00 PM

  • tastysnx

    4 Posts

    591

    0

    Posted May 28th, 2006 17:00

    I do mean to have different devices, say two computers, one into the digital input and one into the analog input on the monitor, and to use the input switch on the monitor to switch back and forther between displaying either computer. I take it from your response that this should not be done. Is that the case?
  • bytor65

    1 Rookie

    •

    211 Posts

    591

    0

    Posted May 28th, 2006 18:00

    One monitor. Using VGA and DVI and the same time and switching back and forth on the fly. This is requirement for any screen I would buy.
  • bytor65

    1 Rookie

    •

    211 Posts

    591

    0

    Posted May 28th, 2006 18:00

    Perfectly fine. I had both a 2405 and 2007fp and did this putting computer on DVI and and RGB tuner into the VGA connector and switching back and forth between them all the time.
  • tastysnx

    4 Posts

    591

    0

    Posted May 28th, 2006 18:00

    Bytor - Snowdog here. Do you mean that you had two computers going into the same monitor, or that you had two monitors?
  • tastysnx

    4 Posts

    591

    0

    Posted May 28th, 2006 20:00

    It certainly seems like you should be able to. I would like to get an offical Dell OK before I do it to my shiny new monitor. Moderator? Thanks for the info, Bytor. Rush rocks.
  • 591

    0

    Posted June 1st, 2006 17:00

    Both VGA and DVI are okay to hook up at the same time. There is no issue with this.
    It will not impact your monitor to do this.