What video chip? Nvidia, ATI, Matrox? Are you connected to the monitor VGA, DVI? More info. would help! I don't think most people know what's in a 4600 off the top of their head.
* With the menu off, push the MENU button to open the OSD system and display the main features menu
* Push the Up and Down arrow buttons to move between the function icons
* Highlight Factory Reset
* Push the MENU button once to activate the highlighted function; then use the + and - buttons or the and buttons, according to the indicators on the menu, to make your changes
* Push the Menu button two or three times to exit from the OSD
You never answered if the connection to the LCD was DVI, or not? If DVI go into the ATI driver control panel and check the box that says, "reduce DVI frequency". See if that helps. My 2001FP displays the same distortion as you describe without that box checked. The distortion will not appear on the VGA connection you made to the CRT. That's really an apples and oranges comparison and doesn't even apply if you're connected DVI to the LCD.
Joe Average
179 Posts
345
0
Posted October 21st, 2004 13:00