UNSOLVED

heidia28

updated

23 years ago

Closed

H

heidia28

2 Posts

0

12576

March 15th, 2004 01:00

Water spilled into notebook

Hi there-

A week ago I knocked a glass of water into my 1100. I turned it off and turned it over with the keys down to drain. I let it dry for a few hours. I fired it back up that same day- the keys were sticking at first, but now they work perfectly fine. I am having trouble with the programs that require a lot of memory though. They keep freezing and won't let me save anything. Also, whenever I boot the computer, it starts a constant beeping sound, as if the regular single "beep" is stuck.

I know I will need to take it somewhere to be looked at, but I am just wondering if this sounds like a big deal. If it's something that will cost a lot to replace, I'd prefere to just buy a new system (since the 1100 isn't that great anyway).

Is there anything else I can do to get it working correctly?

  • Unknown_host

    1 Message

    1484

    0

    Posted March 15th, 2004 01:00

    If it is just the memory that is bad, then that is not a big thing, only problem becomes if the socket itself is burned out. If so, then look for a new mobo, which I belive can be found for not much money.

    -craig

     

  • Watson416

    125 Posts

    1484

    0

    Posted March 15th, 2004 04:00

    Should have givin more then a couple hours to dry. More like a couple days.
  • heidia28

    2 Posts

    1484

    0

    Posted March 15th, 2004 04:00

    Yeah, I'm finding out a lot about what I SHOULD have done in my online research.

  • pandaboy

    2 Posts

    1484

    0

    Posted March 15th, 2004 06:00

    Hello,

     

    I repair and sell notebooks for a living.

     

    Noone really repairs notebooks, well, that are smart. Cause the repair bill is more then the computer usually.

    If your smart, like i hope you are. Just throw it out and buy a new one.

    There is no middle ground, no passing go, no nothing.

    Even your memory will be out of date, so throw that out too.

     

    You see, most people frown at a warranty. I have people that actually tell me that this happened before and they STILL dont buy the warranty. You would be amazed at how many people choose to "STAY WITH WHAT THEY GOT" Or "1 year is enough for me"

    ITs not expensive, whats 300 bucks if it breaks! What you wanna spend $2000 every year? Yah thats real smart.

     

    I have no sympathy for people who come into my store, ( Circuit city)  With broken notebooks without service.

  • matt37b

    134 Posts

    1484

    0

    Posted March 15th, 2004 08:00



    pandaboy wrote:

    I have no sympathy for people who come into my store, ( Circuit city)  With broken notebooks without service.



    I hope that wasn't a sales pitch trying to get them to buy a new computer from you.  Although I do admit, that I went with the longest complete care coverage that I could get for my latitude.  As for the original poster, I'd hate to suggest buying new memory if the mother board is bad.  You might do better selling the thing as parts on eBay and putting it towards a new computer.  If your screen is fine, it should fetch a good price by itself.
  • flortep

    114 Posts

    1484

    0

    Posted March 15th, 2004 16:00

    I have bought an Inspiron 8200 with UXGA and Ati9000 out of ebay which had a full bottle of sugared soda spilled into it. The advertised text said some soda spilled into the keyboard....   so I thought I give it a chance.

    When I got it, all was dried up already. Battery, media bay drive and fixbay drive could not even be removed, all was really  glued together.   Luckily the DVD-CD combo had no spill received inside...   But the mobo was sticky all over.

    First I  carefully disassembled the whole thing into all its parts.   Then I used a soft bristled brush and a  ph - neutral  baby shampoo  and hand warm water to carefully brush every single part.  That was key board,  mother board, power board, switchboard graphics and even the processor.    One by one I shampoed (spelling ?) and rinsed everything and shook it out to minimize excessive water from all surfaces.    With a soft towel I touched all surfaces dry and removed the last visible drops of water.  Finally all parts were placed on a warm (not hot) heating radiator with lots of newspapers underneath.

    All dried for 2 days, and was re-assembled then.   Memory sticks and WLan mini PCI were carefully pushed in an out a couple of times to ensure good contact again.

    The new (A13) Latitude C840 bios was flashed into it and the whole thing booted up and worked on the very first try  !!   It took some insertions into my C/Dock II until the docking connector made a good contact.      This is no BS,  but admitted    it may have been a lot of luck.  And as having been a computer technician for all of my life, some experience too. 

    I'm writing this post on that unit which is inbetween upgraded to an M50 with 2.4 Mhz,  a Quadro 700,  2 GB of memory,  and 4 x 80 Gb   Toshiba drives.                                    That's the System drive, M-Bay drive, Dock-Bay drive and a Firewire drive.    If I only could find an affordable 2.6 Ghz processor....

    So give your "watered" unit a good chance and a try.         You can't save more !

    flortep

  • glenhead

    138 Posts

    1484

    0

    Posted March 15th, 2004 20:00

    One of the primary things to watch out for is residual dihydrogen monoxide contamination.  It's nasty stuff, and almost all bottled and/or tap water has measurable quantities of it.  For further information, I refer you to this link:

    http://www.dhmo.org/facts.html

     

    Civic-mindedly,

    Glen
    i8500
    2.2GHz P4m
    512Mb RAM
    Radeon m9000

    Eschew misoneism.

  • matt37b

    134 Posts

    1484

    0

    Posted March 15th, 2004 21:00

    Only elected officials in Calf. need to concern themselves with that!!!

    http://www.wtopnews.com/index.php?nid=108&sid=179063