UNSOLVED

bigworld005

updated

17 years ago

B

bigworld005

52 Posts

0

21044

October 29th, 2009 20:00

Verical lines on Inspiron 6400 screen

hi,all,

  there are 3 vertical lines appeared on the right side of my Insprion 6400 screen. it starts from 1 and later turn into 3 , probably 4. but if I hook a 2nd monitor to the laptop, there are no lines at all. and if I till the screen at a specific position, all the lines disappear too. this position is between 90 and 180 .

  I think my video card and display panel must be all right but some connection must be loose. I suspect that it is either the cable between the mother board and the screen, or the connectors behind the panel.  but the former is not possible because I pressed the cable connecting to the motherboard, the lines are still there.  

anyone has suggsestions?

 

thanks,

t.z.

  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    247

    0

    Posted October 30th, 2009 07:00

    The screen has developed faults, probably at the edges.  You'll need to replace it - faults like this one cannot be repaired.

     

  • bigworld005

    52 Posts

    247

    0

    Posted October 30th, 2009 09:00

    yes, you are right. the lines first appeared on the very right side edge, and they are still there now, a whole bunch of them. I didn't mention it because I think these lines do not interfere the image/view too much.

    so if I have to replace the panel, do I need to replace the inverter too?

     

    thanks,

    t,z

  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    247

    0

    Posted October 30th, 2009 09:00

    If you use exactly the same panel and the brightness is OK, you can reuse the inverter.  If you use a different model screen, you'll likely need a different inverter and data cable, so be sure you get those parts with the screen (and be sure the screen is known to have shipped with your model of system - they are not universally interchangeable).