UNSOLVED

trebmalaj

updated

21 years ago

Closed

T

trebmalaj

3 Posts

0

7200

March 1st, 2006 00:00

USB hi-speed controller

I have read some other post but nothing that can help me.  I have purchased a external hard drive that is USB 2.0 and I get the "you do not have a Hi-speed USB controller" message.  Can anyone help me?
  • Simmerheli

    1 Rookie

    •

    109 Posts

    516

    0

    Posted March 1st, 2006 00:00

    Not being familiar with the 5150, I'm assuming it supports USB 1.1 ports only. The USB 2.0 drive will work fine but only at 1.1 speeds.
     
    If you want the 2.0 speeds, an alternative would be to purchase a USB 2.0 PCMCIA card.
     
    -Mike
     
  • trebmalaj

    3 Posts

    516

    0

    Posted March 1st, 2006 00:00

    I thought I should Add that I have a Inspiron 5150 and running XP
  • trebmalaj

    3 Posts

    516

    0

    Posted March 1st, 2006 02:00

    See I thought that I may have had that put in when I bought it.,  I could be mistaken though. 

     
  • Excrazymac

    94 Posts

    516

    0

    Posted March 1st, 2006 04:00

    google searching the 5150 shows that there is probably usb 2.0 support. maybe half are usb2.0 and half are 1.1.

    try different ports and see if you get the same message. also, if you have another usb2 device, plug that in and see if it says the same error.
  • bacillus

    2 Intern

    •

    14378 Posts

    516

    0

    Posted March 1st, 2006 09:00

    In device manager do you have an enhanced USB controller and have you in the past applied sp1 to your original install?

    Can you also confirmed that you have not reinstalled your operating system?