
UNSOLVED
New Panel for a E6400
Hi, would it be possible/easy to install a LED panel in a E6400 that previously had a LCD one?
This is the part number listed for my machine:
G022H - LIQUID CRYSTAL DISPLAY..., 14.1WXGA, VIDEO ELEC. STDS. ASSOC...., LIGHT EMITTING DIODE..., LGP
Responses (8)
Solutions (0)
Whatever you do buy, if the resolution is higher, you will need a new data cable -- and ensure the panel you're considering shipped with the model you have (i.e., you cannot buy LCDs simply by resolution and size -- the screen has to be supported by the system you have).
The E-series did have higher-resolution screen options - but as above, you may wind up needing more than just the screen and cable. Very often you also need a new bezel and back cover.
What about this one?
I'll probably need a new bezel as my laptop has a webcam that I would like to keep

ejn63
11 Legend
•
87469 Posts
•
321256 Points
511
0
Posted December 8th, 2012 08:00
If you're going to try this, you'll likely need to replace the entire top half of the system - screen, bezel, back cover, data cable - together.