UNSOLVED

GunnarD

updated

23 years ago

Closed

G

GunnarD

11 Posts

0

14001

January 9th, 2004 20:00

My 5150 won't receive any current.

Hello all,

When i connect the ac-adapter i don't se any LED's lightning on the computer and the batteri does not charge.

I have tried with a other ac-adapter, with halv the correct current, and when i connect this the LED on the computer flash green, but the stays off. Probablye because the ac-adapter can't deliver enough current.

Anyone have any ide whats wrong? I think that it's the ac-adapter thats not working.
  • 309

    0

    Posted January 10th, 2004 00:00

    When you have the Original AC Adapter plugged in whith the power OFF and then turn the power On, does it say you have the incorrect adapter plugged in and to use the Dell 130W adapter instead even though that is the one you are using?  That is what is happening with mine, just wondering if others are experiencing the same.
  • GunnarD

    11 Posts

    309

    0

    Posted January 10th, 2004 08:00

    I can't start the machine, the battery has not enough power for it.
  • DELL-BobT

    3125 Posts

    309

    0

    Posted January 12th, 2004 20:00

    GunnarD,

    Thank you for using the Dell Community Forum.

    Please attempt the following steps to find a solution to your issue:

    1. Verify that the AC adapter brick is receiving power.
      • Unplug the adapter from the wall and the system. Wait 5 seconds. Plug the adapter back into the wall. You should get a steady green light on the adapter. Make sure the adapter is plugged directly into the wall; not through a surge protector, UPS, or extension cord.
      • Try another wall outlet in another room or verify the outlet works with a lamp. You can also verify a bad AC adapter by swapping it out with another one, if available - such as one for use with the port replicator.
    2. Check the connections.
      Make sure the AC adapter connector has a tight fit and the connector on the system does not have any pins that are pushed in or bent.


     

  • GunnarD

    11 Posts

    309

    0

    Posted January 14th, 2004 17:00

    I have now a new 130W ac-adapter, got a new one from Dell service, and now it works.

    It was the ac-adapter that stop working after 2 months!
  • CARHENI

    6 Posts

    309

    0

    Posted April 22nd, 2004 06:00

     If the litlle pin is bendt and touch the internal wall of the conector, do you think that the ac adapter will be damage? After if the pin es repared do you think that the laptop nprmally will work?

  • CARHENI

    6 Posts

    309

    0

    Posted April 22nd, 2004 07:00

    What model or Dell part number did you get? Does the new ac adapter  come with the same electrical caracteristics than the old one? Could you show  me up the internet Dell page were you did find the inspiron 5150 ac adapter?
  • GunnarD

    11 Posts

    309

    0

    Posted April 23rd, 2004 05:00

    I call'ed Dell support and explained that my ac-adapter was broken they send me a new one after som stupid question about if i hade connect the cables. :)
  • CARHENI

    6 Posts

    309

    0

    Posted April 23rd, 2004 15:00

    Hi GunnarD.

    What model or Dell part number did you get? Does the new ac adapter  come with the same electrical caracteristics than the old one? Could you show  me up the internet Dell page were you did find the inspiron 5150 ac adapter? You can see the electrical caracteristics on the tag tha came with the ac adapter.

    Thanks

    Marco.

  • GunnarD

    11 Posts

    309

    0

    Posted April 23rd, 2004 17:00

    Spec:

    Model: PA-1131-02D
    Input: 100-240V~ 50-60Hz 2.5A(2.5A)
    Output: 19.5(19.5)V= 6.7A(6.7A) 130W