
UNSOLVED
Closed
J
jerblaster23
6 Posts
0
23248
April 13th, 2006 20:00
internal speaker wires broken
my 700m's speakers stopped working and after trying several things like re-installing my audio drivers and restoring a ghost image i decided to take apart my notebook and wala I found the speaker wires snapped. Not sure why looked like they were crushed from opening/closing the lid, the broke right up close to the speaker so there no room to splice or solder them back togather. So with a little frustration I was able to remove the trim around the lcd display and ultimatley unplug the speakers from under the keyboard and remove them. The only problem is there was one screw or something hidden close to the wifi led light that wouldn't come lose so I had to twist and tweek the trim a little to get to the last screw to remove the speakers.
Anyway got it out fine and put everything backtogather and it's working fine. My question is where do I get new speakers? Will the 4 prong plug match, are they pretty universal or do I need to get the same speakers, maybe someone can recomend some decent speakers that will go back in place for me. Also if anyone is fomular with removing the trim on the lid, just to the upper left of the wifi green led light is the stubborn screw or snap I couldn't get, if you have any tips on that so I can get the new ones back in with a little less fuss, thanks
also the speakers read:
FG 4014J1
40 1.5W
Anyway got it out fine and put everything backtogather and it's working fine. My question is where do I get new speakers? Will the 4 prong plug match, are they pretty universal or do I need to get the same speakers, maybe someone can recomend some decent speakers that will go back in place for me. Also if anyone is fomular with removing the trim on the lid, just to the upper left of the wifi green led light is the stubborn screw or snap I couldn't get, if you have any tips on that so I can get the new ones back in with a little less fuss, thanks
also the speakers read:
FG 4014J1
40 1.5W
Responses (6)
Solutions (0)
jerblaster23
6 Posts
891
0
Posted April 15th, 2006 02:00
thanks, that is perfect I just ordered them. If anyone who has taken apart the trim on the monitor knows about that last snap by the wifi led, before these arrive that would be helpfull, but I can get them back in either way.
also I contacted dell support and they want to set up a repair service as I am under warranty, I have never delt with support so I don't know if it's worth it probably just easier to put these in my self.
I was thinking I would wrap the wire with some electrical tape by the lid henge to avoid the wire from becoming damaged again not sure what exactley was pinching it.loooney2ns
17 Posts
891
0
Posted September 16th, 2006 21:00
@jerblaster23 wrote:
thanks, that is perfect I just ordered them. If anyone who has taken apart the trim on the monitor knows about that last snap by the wifi led, before these arrive that would be helpfull, but I can get them back in either way.
also I contacted dell support and they want to set up a repair service as I am under warranty, I have never delt with support so I don't know if it's worth it probably just easier to put these in my self.
I was thinking I would wrap the wire with some electrical tape by the lid henge to avoid the wire from becoming damaged again not sure what exactley was pinching it.
There is a screw by the wi-fi led under the silver cover to the left of the wi-fi light. Peel the cover off with a small screwdriver or razor.- Does anyone have a new source for the replacement speakers? It appears the site has stopped selling them. Does dell spare parts offer them, and if so what is the part number?
It would be great to see a moderator address this problem and at least give us an avenue to fix this design flaw. loooney2ns
17 Posts
891
0
Posted November 6th, 2006 09:00
Dell has never sold them separately. They sell the whole screen complete. I have been looking for new ones for months.jerblaster23
6 Posts
891
0
Posted March 29th, 2007 07:00
well it has happened again a year after replacing my speakers with their snapped speaker wires my new ones have broken in the exact same place, I can replace them again and maybe try and tape them up with some electrical tape this time to protect them and it should be ok. Greg16 looks like your links is still good so I am re-ordering, going to get it right this time around, maybe a little hot glue over the wires would do the trick to protect them so they can't be pinched so easily.
Message Edited by jerblaster23 on 03-29-2007 03:30 AM

Greg16
121 Posts
891
0
Posted April 15th, 2006 00:00
http://www.parts-people.com/index.php?action=item&id=2980&prevaction=category&previd=27&prevstart=30