
UNSOLVED
Closed
D
devilrunner
3 Posts
0
43789
June 30th, 2004 14:00
D600 doesn't power ON anymore
I was working on my d600 when it sudenly powered itself of. I pressed the power button again and it started booting again. I moved it back to my desk and it powered off again. Now it doesn't power on at all.
The only thing isee pressing the power button is a red battery led. Putting it on Ac doesn't change anything.Removing the battery neither.
Sometimes when I aply some pressure to the battery socket or the laptop in general, don't know what the trick is exactly, I get a green light which means it's booting I guess but this only lasts for a couple of seconds.
Anybody have any sugestions or is this a know problem with the D-series?
Responses (15)
Solutions (0)
devilrunner
3 Posts
590
0
Posted June 30th, 2004 22:00
And do you to get the same symptons?
red battery status light?
Maybe you can get it powered by applying some presure on certain places of the chasis?
I think I will call dell and ask them what todo....
Message Edited by devilrunner on 06-30-2004 06:51 PM
windchaserb
22 Posts
590
0
Posted July 1st, 2004 00:00
Just got off the phone with Dell Tech Support. The prognosis - I need a new motherboard. Of course my warranty runs out tomorrow but they can't find a record of it. Gotta love this!devilrunner
3 Posts
590
0
Posted July 1st, 2004 10:00
that's a pain.....
And tell me, do you only get a red battery led indicator to?
Rik van der Wer
1 Message
590
0
Posted July 1st, 2004 19:00
huh :|, same thing here... I tried to power on the laptop and nothing happened :/
My battery light ain't red.windchaserb
22 Posts
647
0
Posted July 2nd, 2004 00:00
When I plug in my ac adapter into the d600 the led on it (the ac adapter) immediately goes out.
windchaserb
22 Posts
647
0
Posted July 9th, 2004 22:00
Well I got my D600 back from Dell - all fixed up with a brand new motherboard. Works just fine. Glad it came with a 3 yr warranty.OptiPlexed
1 Rookie
•
62 Posts
647
0
Posted July 12th, 2004 17:00
We had a similar problem with the C Series and after a lot of head scratching we found a surprising fix. Previously, we found having the MB replaced fixed the problem but we felt it was strange for our ironman Dells were having MB failures. (Deleted Long Detailed Story)
Check the screws on the bottom on the laptop and make sure they are tight. In most of our cases we believe loose screws were the problem and not the motherboard. Of course when the motherboard was replaced, any loose screws were tighten.
windchaserb
22 Posts
457
0
Posted July 12th, 2004 20:00
Thanks - that was one of the options suggested via a dell support email I received. The screws however, were tight. The motherboard replacement fixed it.

windchaserb
22 Posts
590
0
Posted June 30th, 2004 22:00