
UNSOLVED
Closed
MR
Mark Ronald
53 Posts
0
17820
December 8th, 2004 21:00
Black border on an Inpiron 9200 using ATI Mobility Radeon 9700
Im having issues with the Inspiron 9200 video... when its set on to a 1920 x 1200 with 120 dpi, the screen is covered but due to the high resolution...its do tiny... but when i put it to 1024 x 768...the picture is big and there is a black border... i dont have the black border when doing the PSA and the 32 bit diagnostics...the screen is perfect...i think there is a problem with the driver itself or the XP... i have already downloaded the "latest" driver for this at this website and still aint working... i've already contacted DELL for this and they said that this is a hardware limitation.. i dont know what that suppose to mean... I love this system...Its nice... but i would really like to have its full functionality... thanks
Responses (11)
Solutions (0)
Mark Ronald
53 Posts
713
0
Posted December 8th, 2004 23:00
no sparkles what so ever...just black border..its a hardware limitation...JFriedman86
54 Posts
713
0
Posted December 8th, 2004 23:00
WUXGA is meant to be run at 1900x1200, anything else and it will not appear correctly/well at all.- As JFriedman86 said the UXGA screen should always be run at 1920 * 1200, the only exception would be video games. This is known as the UXGA's native resolution. Running at any other resolution will degrade the clarity of the screen, especially text. This is a limitation found in all LCD type displays because of how the technology works. Each pixel represents a physical screen component so the LCD really only has one true resolution - its native resolution. Setting it to anything other than the native resolution basically requires the graphics card to do pixel interpolation, which amounts to joining pixels together to simulate the target resolution.
- Its not a limitation of an LCD display. It has to do with aspect ratio.
1920 x 1200 is a wide screen ratio (16:10 as Dell states someplace) while 1600 x 1200 or lower is not. Its like watching a wide screen movie on a standard TV(4:3 aspect ratio), you get black bars. Go to: Start>Control Panel>Display
Click on the "Settings" tab, should be last one on the right, then click the "Advanced" button near the bottom.
Click on the tab named "ATI Displays", click on "Panel" (for laptop screen).
Under Panel Attributes there is a button next to "Scale Image", its a small blue bubble type button next to the words "Scale Image", I missed it at first because it doesn't look like a regular radio button =/
Click the button for "Scale Image" and then make sure the radio button next to "Expand to full panel size" is checked below it.
Hope this helps =)
- Krusty - the black boarder is certainly related to the limitations of an LCD display and my explaination about they way they work is accurate. If the boarder was ONLY on the the left and right side, then it could be explained by aspect ratio. However with LCD displays when running at a non-native resolution one of two issues will always occur, based on video settings.First you may have pixel interpolation, where the graphics card combines pixels to give you a simulated target resolution. This typically uses the full screen unless you pick a resolution that is not the proper aspect ratio (at which point you would see a boarder on the left and right). The simulated resolution will be of a lesser quality than what be produced when using the native resolution. The second case is where the target resolution is produced by only using a subset of the available pixels, in which case a boarder will be seen around the entire display. This will give a sharper picture than the simulated resolution, but at the cost of having unused screen real estate.
Message Edited by anettis on 12-12-2004 11:32 AM
Madmoxi - my statement was not in error - rather I explained precisely why your fix worked. When you experienced the issue of having a black frame around your screen your graphics configuration was setup to use a precise resolution (rather than a simulated resolution). The resolution you were using was below the native resolution so the graphics card simply shrunk the viewable area (by disabling the outermost pixels) – resulting in the black framing issue.
Once you changed the setting to “Scale Image”, which is essentially telling the graphics card to use pixel interpolation to simulate the target resolution, then it was then able to utilize all the screen real estate.
:smileyhappy:
Message Edited by anettis on 12-12-2004 12:16 PM
@anettis wrote:
If the border(sic) was ONLY on the the left and right side, then it could be explained by aspect ratio.
Although my laptop is an XPS I do have an ATI 9700 and the information I posted fixed the problem of having a "picture frame" effect, that is to say that I had a black border on ALL sides of my desktop, top, bottom and both sides, not only on the sides. So this statement is in error.
It is a simple procedure to try, it can't hurt and has worked for myself and others.
Information is power, you can't have enough of it and no one person has all the answers.
- ATi graphics chips older than the brand new X800 cannot scale resolutions larger than 1280 x 1024. Anything lower and it CAN scale the image to the full screen. Anything larger will be displayed at a 1:1 pixel ration. Hence, 1600 x 1200, having the same vertical pixel dimension will have just black bars on the side. 1680 x 1050, being the same ratio, will have black bars all the way around. This is ONLY an issue on the WUXGA screens and ATi video cards. ATi developed a hardware scaler while nVIDIA developed a software scaler. The ATi scaler is better, but cannot scale beyond 1280 x 1024. The nVIDIA is not as good as ATi's but can scale (in theory) any resolution.
As someone pointed out, the ATi drivers (via the ATi Control Panel) can be set to scale lower resolutions to either 1) full screen or 2) maintain the aspect ratio. Again, this is only for resolutions 1280 x 1024 and lower. Option 2, "maintain the aspect ratio" will produce less distortion, but will result in black borders on the right and left. In other words, the same effect as watching a wide screen movie on a full screen TV; only reversed.
Oh, and this is assuming you have "Image Expansion" enabled in the BIOS.
when will people learn to search the forums???

chp5592
12 Posts
698
0
Posted December 8th, 2004 22:00