UNSOLVED

timdg

updated

14 years ago

T

timdg

1 Rookie

•

13 Posts

0

220695

December 27th, 2007 00:00

XPS 420 eSata does NOT work

I see several other unresolved postings regarding this but no responses from Dell.
 
The eSata port on the XPS 420 does not work. I have a WD 500GB eSata hard drive that works on another computer. When I plug it into the XPS 420 it does NOT find it, even though the port IS enabled in the Bios. Since the drive and cable work on another computer it is obviously a problem with the XPS 420. A google search produced one page claiming Dell techs know of this problem and are working on a BIOS update to correct - any idea when this is coming or any other ways to get this port to work ASAP?
  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    640

    0

    Posted December 28th, 2007 18:00

    timdg,

    Researching this...


    DELL-Chris M (old account)

    #IWork4Dell

  • wynand32

    366 Posts

    640

    0

    Posted December 28th, 2007 19:00

  • timdg

    1 Rookie

    •

    13 Posts

    640

    0

    Posted December 28th, 2007 23:00

    I checked the mentioned thread. The eSata connector is a small silver box ont he motherboard - not really anything that could be checked for a loose connection. My cable (or the connection to the WD drive) cannot be the problem because I can disconnect the end from the XPS420 and plug it into an older computer and have it work no problem.
  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    640

    0

    Posted December 29th, 2007 16:00

    timdg,

    Look at the plastic surrounding the eSata plugs on both PCs. Do they look the same?


    DELL-Chris M (old account)

    #IWork4Dell

  • HaloBox

    108 Posts

    640

    0

    Posted December 29th, 2007 21:00

    In order for the eSATA port to work, the SATA controller must be in AHCI mode.  However, my XPS 420 blue screens nicely if the BIOS setting is changed and rebooted.  Does Dell have a fix coming for this?
     
    Thanks,
     
    Halobox
  • HaloBox

    108 Posts

    640

    0

    Posted December 30th, 2007 03:00

    Thanks. 
     
    By the way, my HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\msahci Start key is set to 0 per KB instructions.
     
    See the KB article I am referring to at http://support.microsoft.com/kb/922976.


    Message Edited by HaloBox on 12-30-2007 12:57 AM
  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    640

    0

    Posted December 30th, 2007 03:00

    All,

    Put your XPS 420 service tag number in your DCF (Dell Community Forum) profile so I can add them to my notes.


    DELL-Chris M (old account)

    #IWork4Dell

  • DELL-Chris M

    Community Manager

    •

    56891 Posts

    •

    232143 Points

    640

    0

    Posted December 30th, 2007 03:00

    HaloBox,

    I have sent all of this data to the engineers.


    DELL-Chris M (old account)

    #IWork4Dell

  • timdg

    1 Rookie

    •

    13 Posts

    640

    0

    Posted December 30th, 2007 04:00

    For my other computer that my eSata drive works on correctly, the eSata port is a bridge I installed myself so the location of the port itself will of course be different.
     
    I still don't understand the BIOS settings alluded to various places. My system has RAID off, I don't want RAID - I have an older XPS system that had RAID and it makes installing anything a huge pain with, at best, minimal performance boost so it is a lot of complication that is just not worth it!
     
    All I know is I should be able to plug in my eSata drive and have it work. I don't even care about hot swapable so I might have to resort to installing my own bridge again from one of the internal ports - just more hassle then I should have to so since there is an eSata port built in that SHOULD work...
  • HaloBox

    108 Posts

    398

    0

    Posted December 30th, 2007 05:00

    No worries.  By changing the BIOS setting, you actually aren't turnning on a RAID configuration.  You are changing the mode from ATA to AHCI.  To setup RAID, you need to go into the RAID configuration options which are outside of the BIOS settings (visible on the next boot).