
UNSOLVED
USB Problems
My system board (a.k.a. Mother Board) was replaced by Dell Techs. Prior to the system going down, I had four USB appliances (Cameras (e.g., Intel PC Camera Pack) and CD-RW burners (e.g., Iomega ZipCD)) which could be plugged, unplugged, and operated as advertised. With the new board in place, NONE of this is true.
System properties shows that I have an operating Intel 82371AB/EB to USB Universal Host Controller and a USB Root Hub -- both indicate that they are operating normally. Whenever I plug in one of the devices, I have an Unknown Device with a exclamation point in a yellow circle -- including the suggestion to update the drivers (a Code 10 thing). All attempts to update the drivers have not changed this condition.
All support programs have been uninstalled and re-installed, including the Windows ME operating system.
The USB appliances are operational -- as checked on another computer.
Any other similar experiences? Any helpful suggestions?
Jim
System properties shows that I have an operating Intel 82371AB/EB to USB Universal Host Controller and a USB Root Hub -- both indicate that they are operating normally. Whenever I plug in one of the devices, I have an Unknown Device with a exclamation point in a yellow circle -- including the suggestion to update the drivers (a Code 10 thing). All attempts to update the drivers have not changed this condition.
All support programs have been uninstalled and re-installed, including the Windows ME operating system.
The USB appliances are operational -- as checked on another computer.
Any other similar experiences? Any helpful suggestions?
Jim
Responses (3)
Solutions (0)
thereal_DBK4297
45 Posts
280
0
Posted January 7th, 2001 15:00
Hi,
It sounds as if Dell replaced the board with one that is defective.
Call then and have them replace the board. "again"
PattonJ wrote:
- My system board (a.k.a. Mother Board) was replaced
- by Dell Techs. Prior to the system going down, I
- had four USB appliances (Cameras (e.g., Intel PC
- Camera Pack) and CD-RW burners (e.g., Iomega ZipCD))
- which could be plugged, unplugged, and operated as
- advertised. With the new board in place, NONE of
- this is true.
-
- System properties shows that I have an operating
- Intel 82371AB/EB to USB Universal Host Controller
- and a USB Root Hub -- both indicate that they are
- operating normally. Whenever I plug in one of the
- devices, I have an Unknown Device with a exclamation
- point in a yellow circle -- including the suggestion
- to update the drivers (a Code 10 thing). All
- attempts to update the drivers have not changed this
- condition.
-
- All support programs have been uninstalled and
- re-installed, including the Windows ME operating
- system.
-
- The USB appliances are operational -- as checked on
- another computer.
Mis Dos Centavos,
Darrell
Choose from the complete list of FREE providers.
- the UNreal_DBK4297 spewed:
- It sounds as if Dell replaced the board with one
- that is defective.
- Call then and have them replace the board. "again"
Oh NO....the Krumbasher is back....quick everyone - hide the tinfoil.
Satisfied Dell customer since 5-8-98 :-)
PLUGINSPAGE="http://www.macromedia.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash">
F91W5 EF29F V8X2P / Krups 466c ( Tahoe Blue)
ATTENTION! Looking for the mother ship? Don't click this.

PattonJ
2 Posts
280
0
Posted January 7th, 2001 14:00
Jim