UNSOLVED

ikelleigh

updated

19 years ago

I

ikelleigh

15 Posts

0

16924

September 22nd, 2007 21:00

USB Keyboard/Mouse Unresponsive During Windows XP Install

System: Dell Dimension 9100 I've recently run into some issues with drivers and have been trying to "repair" my Windows installation. So during the reboot process it runs the Windows XP install, and goes on it's merry way. Then suddenly I get a message asking about a NVIDIA GeForce 6800 driver installation asking to verify... yes or no. Problem is, now my mouse and keyboard don't operate to give it the answer it's looking for. There are no ports on this system for legacy devices other than USB. So what are my options? Many thanks for some help on this.
  • ikelleigh

    15 Posts

    533

    0

    Posted September 22nd, 2007 21:00

    The only things hooked up to USB are the Mouse and Keyboard during the installation. No printers, scanners or anything else except the monitor.

    I would assume that it is unsafe to turn off the computer when it's in the middle of an installation. Or should I try turning it off and starting over? I'd really not want to go through another 2.5 hour session of DSKCHK again.
  • ManyDimensions

    1318 Posts

    533

    0

    Posted September 22nd, 2007 21:00

    ikelleigh
     
    If you have a USB printer attached to your computer, unplug it until the install is complete.
     
    If that does not work for your, try switching the USB ports for your keyboard and mouse.
     
    MD
  • ikelleigh

    15 Posts

    533

    0

    Posted September 22nd, 2007 21:00

    and yes... I have tried swapping the Keyboard and Mouse connections, and tried all of the other USB connections on the machine.
  • ikelleigh

    15 Posts

    533

    0

    Posted September 22nd, 2007 22:00

    Still no go.

    And as an added test, I plugged in a USB Flash Drive into the USB ports and it lights up fine... so I know the ports are working and have power.

    It seems to be hung up installing the drivers for the Mouse and Keyboard, but I can't get passed that NVIDIA driver dialog to keep the installation going.
  • ManyDimensions

    1318 Posts

    533

    0

    Posted September 22nd, 2007 22:00

    ikelleigh
     
    Yes, it is not a good idea to shut off the computer during the O/S install routine.
     
    Each USB row is a bank on the back of your Dimension.
     
    One row has the Ethernet connector incorporated.
     
    Plug the keyboard into the row without the Ethernet,
     
    Plug the mouse next to the Ethernet.
     
    If still no work, swap the mouse and keyboard exactly.
     
    MD
  • ikelleigh

    15 Posts

    533

    0

    Posted September 23rd, 2007 00:00

    Here's a thought, does Dell offer a PS/2 Port card to add to this Dimension 9100? I could get one of those and buy a cheap PS/2 mouse to get me through this problem.