
UNSOLVED
Q
QuietObserver26
1 Message
•
4 Points
0
28
November 13th, 2026 23:51
Dell Webcam WB7022 "No Video" on direct Mac Studio (M4 Max) USB-A ports under macOS 27.2.1 — works via U2725QE monitor hub
Logging this compatibility issue so Dell's peripheral/macOS engineering team is aware (no troubleshooting or hardware replacement needed—I am already using the monitor hub workaround below).
Issue Summary:
After updating to macOS 27.2.1 (Build 26B131), the Dell UltraSharp Webcam WB7022 powers on (white LED active) and enumerates at 5 Gb/s (4.48 W) in macOS System Information when plugged directly into a 2025 Mac Studio's rear USB-A ports, but FaceTime and all video apps display "No Video" / a black screen.
System & Hardware Details:
- Computer Model: 2025 Mac Studio (Apple M4 Max, 36 GB RAM)
- Operating System: macOS 27.2.1 (Build 26B131)
- Webcam Model & Firmware: Dell UltraSharp Webcam WB7022 (Firmware 0.0.9.2)
- Monitor Model & Firmware: Two Dell U2725QE monitors (Firmware M2T102)
- Software Status: Tested both with DDPM v2.3.0.2004 installed and after completely uninstalling DDPM (using Apple's native UVC driver).
Troubleshooting & Workaround Confirmed:
1. Direct connection from WB7022 (via Dell USB-C to USB-A cable) into the Mac Studio's rear USB-A ports produces a black screen / "No Video".
2. Testing the same WB7022 on an Apple laptop works normally.
3. Moving the WB7022's USB-A cable from the Mac Studio's rear port to the downstream USB-A port on a Dell U2725QE monitor (connected to the Mac Studio via Thunderbolt/USB-C) immediately restores full video across all apps.
Sharing for Dell engineering awareness regarding direct USB-A / UVC handshake behavior on M4 Max under macOS 27.2.1.
Responses (0)
Solutions (0)
