after update to 4.2 OME dont upgrade firmware and dont make inventory
Good morning. I had DELL om2 3.2 fully functional and I first upgraded to 4 then to 4.2 Now I have the old ome machine turned off and the new one with the new IP on
The new OME seemed to work well but I immediately noticed some problems. Discovery works but inventory doesn't. I also needed to upgrade some firmware and it fails with this error:
JID_319416623186 Firmware Update: Generic Failed (100%) Scheduled Start Time2024-11-18T08:54:22 Actual Start TimeNot Applicable Expiration TimeNot Applicable Actual Completion TimeNot Applicable MessageRED016: Mount of remote share failed.
NO UPDATE WORKS NO INVENTORY WORKS
new ip have same rule of old
so as a last thing I put the old IP on the new OME but things still don't work
With the RED016: Mount of Remote Share failed, OME stages the updates and mounts a share to the idrac and that is what it looks like is not working
In the Application Settings you can see if it's using a CIFS share or HTTPS share to see if changing it resolves the issue. On top of that without knowing what kind of servers they are and what level of idrac firmware we are dealing with it may be difficult to identify, so any other details could help.
Let me know what you see.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
I have OME 4.2 and not able to update my physical server PowerEdge R740 with a REPO created based on Lifecycle Controller Catalog for Enterprise Servers.
The following error message is present for every update of the server:
"Unable to update the Chassis firmware, communication with Chassis Management Controller/Management Module took more time than expected."
The error "Unable to update the Chassis firmware, communication with Chassis Management Controller/Management Module took more time than expected" happens when bi-directional HTTPS isn't enabled. Meaning that the 443 port is likely open from OME to iDRAC, but not from the iDRAC back to OME. I would start with checking that.
Let me know if this helps.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
DELL-Chris H
7 Practitioner
•
9682 Posts
•
48046 Points
0
0
Posted November 18th, 2024 17:30
In the Application Settings you can see if it's using a CIFS share or HTTPS share to see if changing it resolves the issue. On top of that without knowing what kind of servers they are and what level of idrac firmware we are dealing with it may be difficult to identify, so any other details could help.
Let me know what you see.
DELL-Chris H
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!