UNSOLVED

sgthoppa

updated

4 days ago

S

sgthoppa

1 Rookie

•

3 Posts

•

16 Points

1

120

November 14th, 2026 03:18

14 Plus DB14250, reinstall graphics drivers to fix a BIOS power-on issue. Seriously?

I own a Dell 14 Plus DB14250 and have been dealing with a relatively straightforward issue for weeks.

The BIOS has a feature called "Power On Lid Open." It is enabled, but it doesn't work when the laptop is completely shut down.

 

Here are the facts:

  • Opening the lid from Sleep works perfectly.

  • Opening the lid from Shutdown does nothing.

  • Pressing the power button starts the laptop normally.

  • The BIOS setting is enabled.

Instead of investigating the firmware or embedded controller, Dell technical support has suggested:

  1. Disabling Windows Fast Startup.

  2. Checking Device Manager wake permissions.

  3. Running ePSA diagnostics.

  4. Uninstalling and reinstalling the ACPI Lid driver.

  5. Reinstalling chipset drivers.

  6. And now, after allegedly consulting their internal technical team, uninstalling and reinstalling the graphics driver.

How exactly is a Windows graphics driver supposed to fix a hardware power-on event when Windows isn't even running?

I have repeatedly explained the difference between waking from Sleep and powering on from Shutdown. Yet the troubleshooting continues to focus on Windows.

 

All I am asking Dell to do is:

  • Confirm whether this model supports lid-open power-on.

  • Reproduce the issue on another DB14250.

  • Investigate the BIOS or embedded-controller firmware if necessary.

Is this the quality of technical support customers should expect from Dell?

Has anyone else experienced this issue with the DB14250 or been stuck in a similar support loop?

(edited)

  • bibleblessings

    1 Rookie

    •

    7 Posts

    •

    23 Points

    12

    1

    Posted November 14th, 2026 06:37

    You're right to push back on that one. When the laptop is fully shut down, Windows isn't running at all, so no driver can make the lid switch turn it on. That has to come from the BIOS, which is why it works from sleep but not from shutdown. Mine behaves the same way, so I just use the power button now.

  • anne_droid

    6 Operator

    •

    2671 Posts

    •

    9821 Points

    0

    0

    Posted November 14th, 2026 10:28

    Hi

     

    The internet offers...........

     

    If Power On Lid Open is already enabled in the BIOS but the Latitude 7420/“14250” does not start after a full Windows shutdown, the setting is likely being overridden by Windows fast startup/hibernation or the system is not truly off. Dell’s feature is intended to power the laptop on when the lid is opened, provided the BIOS setting is enabled and saved.

    Enable it correctly

    1. Restart the laptop.

    2. At the Dell logo, press F2 to enter BIOS Setup.

    3. Go to Power or expand Power Management.

    4. Set Power On Lid Open to Enabled.

    5. Select Apply Changes → OK.

    6. Select Exit and let it reboot. Dell specifically requires the change to be applied before leaving Setup.

    Make Windows fully shut down

    Windows “Fast Startup” can leave the system in a hybrid shutdown state rather than a true power-off state, which can interfere with lid-open power-on behaviour.

    1. In Windows, open Control Panel → Hardware and Sound → Power Options → Choose what the power buttons do.

    2. Select Change settings that are currently unavailable.

    3. Under Shutdown settings, untick Turn on fast startup (recommended).

    4. Save changes.

    5. Use Start → Power → Shut down.

    6. Wait until all lights are off, close the lid, then reopen it.

    If it starts from that true shutdown, Fast Startup was the cause. If you need Fast Startup for boot speed, test whether disabling it is acceptable; it mainly affects the initial Windows boot after shutdown, not a restart.

    • Ensure the laptop has AC power or adequate battery charge; a completely depleted battery cannot power on by lid opening.

    • Update the BIOS and Dell chipset/power-management drivers through Dell SupportAssist or Dell’s driver page for your exact service tag.

    • If the setting remains enabled but it still only wakes from Sleep, not from a full shutdown, update the BIOS first; Dell notes that the feature should turn the system on automatically when the lid is opened.

    • Avoid using Hibernate for this test—use Shut down, since hibernation is a powered-down-but-state-saved mode rather than a conventional off state.

     
     
     
     
     

      Kind Regards  

                                         

      anne_droid

     

    User uploaded image

     

  • sgthoppa

    1 Rookie

    •

    3 Posts

    •

    16 Points

    8

    0

    Posted November 14th, 2026 20:05

    @anne_droid​ already tried this multiple times and it doesnt work at all.

  • anne_droid

    6 Operator

    •

    2671 Posts

    •

    9821 Points

    4

    0

    Posted November 15th, 2026 13:39

    @sgthoppa​ 

     

    In that case this will not make a difference....

    WinKey +R   cmd.exe   Shift +Enter

    shutdown /s  /f /t 60

     

    to the re-start.

     

    But it is a proper shutdown method.

      Kind Regards  

                                         

      anne_droid

     

    User uploaded image

     

  • R_Eric1

    1 Message

    •

    5 Points

    3

    0

    Posted November 17th, 2026 15:40

    That is incredibly frustrating, and your logic is spot on. If the laptop is failing to power on from a complete shutdown before the OS even loads, Windows-level graphics drivers have absolutely zero to do with it. This is clearly a BIOS or Embedded Controller (EC) firmware issue.

    It looks like Tier 1 support is just blindly reading from a troubleshooting script for general 'sleep/wake' issues instead of actually paying attention to your specific symptoms. I would keep pushing them to escalate the ticket to advanced support. 

  • kelanjose

    1 Message

    •

    5 Points

    6

    0

    Posted November 18th, 2026 14:40

    It sounds backwards, but there’s a plausible explanation. Drivers don’t load until Windows boots, so they can’t affect BIOS or POST. What they can affect is the Windows power state, which is often what people mean by a “power-on issue”:

    • Fast Startup / hybrid shutdown: Windows saves a partial hibernation state on shutdown, and a buggy GPU driver can corrupt it, so the PC seems to refuse to start or wake. Reinstalling the driver (ideally with DDU in Safe Mode) clears it. Disabling Fast Startup is a good test.
    • Sleep/wake bugs: a GPU driver stuck in a bad power state can leave the screen black after resume, which looks like the PC didn’t power on.
    • Coincidence: reseating the GPU or RAM, or a CMOS reset, can fix a real POST problem, and the driver reinstall just happened to be the last thing tried.

    A quick check: if you see the BIOS splash or logo, POST is fine and the problem is in Windows or the driver. If there’s no display even in BIOS, look at hardware: reseat the GPU, try the motherboard’s video output, clear CMOS, or update the BIOS.

    (edited)