UNSOLVED
Connectrix Manager Software Question
We have an existing DS-24 fiber switched fabric connecting a CX300 array... we are installing a replacement CX310 with two DS-4400m switches... I downloaded the user guide and it speaks about configuring the switch with Connectrix Manager/Element Manager... only thing is I do not have this software, it wasn't shipped with the SAN or switches. I have looked in the software downloads section in powerlink and it isn't listed there.
The previous switches were in place when I took over managing them, I connected via a web-interface to manage them.. no special software needed. Do I need to use Connectrix to setup and configure these switches intially? Please help, can someone point me to where I can get the software or give me some advice about best method for the setup. Thanks in advance.
The previous switches were in place when I took over managing them, I connected via a web-interface to manage them.. no special software needed. Do I need to use Connectrix to setup and configure these switches intially? Please help, can someone point me to where I can get the software or give me some advice about best method for the setup. Thanks in advance.
328
0
Posted January 8th, 2008 12:00
that would be too easy328
0
Posted January 8th, 2008 12:00
Thank you for the advice.... you think if they could send me a cross over cable, a null modem cable and a bunch of labels they could at least send me a software CD huh? Oh well, got to play by there game I guess, thanks again
dynamox
11 Legend
•
20419 Posts
•
87439 Points
328
0
Posted January 8th, 2008 10:00