UNSOLVED

AndreaMazzai-KX

updated

20 years ago

0

965

April 18th, 2007 15:00

Single-processor AX150 without the EMC-coded UPS

Hello all,

a reseller of mine (I am working for a distributor) bought a single-processor AX150 without the EMC-coded UPS.

He is asking some support to use a vendor-supplied UPS (such as APC). Is it possible?

I also would like to know what it is possible to achieve by using

1) EMC-coded UPS
2) non-EMC-coded UPS

Do they "tell" the AX150 that power is missing and force it to shutdown? What else do they do?

Many thanks
Andrea
  • julieg1

    2 Intern

    •

    305 Posts

    524

    0

    Posted April 18th, 2007 15:00

    I split off this separate question so that the questioner could award the deserved points but it turns out it lost the question tag so you still can't do this.

    Still, next time you can start a new thread as a question and then you can award the points and mark the good answers!

    Julie Gibson
  • 524

    0

    Posted April 18th, 2007 15:00

    only dual controller AX150 require an UPS supplied by EMC to enable write cache.
    single controller AX150 does not require an UPS for it's internal functions. for power protection there is no restrictions what make/model UPS to use
  • 524

    0

    Posted April 18th, 2007 15:00

    Thank you for your quick answer Ain!

    Is it possible to control the shutdown of the AX150 from a third-party UPS? I mean,

    suppose there is a "large enough" UPS to keep up the servers and the AX150. First the UPS will "tell" the server that they'd better close their appliactions to avoid data loss. Is it possible to "tell" the Ax150, after the servers powered down, that it should power down itself?
  • 524

    0

    Posted April 18th, 2007 15:00

    Is it possible to control the shutdown of the AX150
    from a third-party UPS?

    i'm afraid this not possible.
  • 524

    0

    Posted April 20th, 2007 01:00

    Julie, thank you for trying :)