I keep reading about how the ax-100 can be managed by Navisphere. Is there a plugin or other peice of software I am missing? I can see it in my Navisphere domain but I can not manage it.
To manage the AX100 from navisphere you need to have the Navisphere enabler installed onto the AX-100 array...
This enabler comes as part of the purchase of the Navisphere Manager License.
If you don't have the enabler then you probably need to speak to your emc rep to see if it was purchased with your original order as the AX-100 can be sold without navi manager..
You can manage AX series unit as a remote domain such as a CX array running full Navisphere but what you can do will be scaled down since you are running Navisphere Express on the AX unit, you won't have all the capabilities of full Navisphere Management.
Even if you upgarde to full navisphere manager on the AX unit some of the key features still will not be available. I tend to like upgrading it to full navisphere so I can use monitoring templates like I do on the CX array. :P
There are two way to manage the CLARiiON AX-100 -Using Navisphere Express(default) -Using Navisphere Manager or Off-Array, to use it you need to install the enabler, it can only be done by EMC or 3rd party support
Note: Despite you could use Navisphere Manager does not mean you could have full features functionality like a CX-CLARiiON, no,, the use of Navisphere Manager is limited to AX capabilities
GlenH
141 Posts
298
0
Posted August 30th, 2007 15:00
To manage the AX100 from navisphere you need to have the Navisphere enabler installed onto the AX-100 array...
This enabler comes as part of the purchase of the Navisphere Manager License.
If you don't have the enabler then you probably need to speak to your emc rep to see if it was purchased with your original order as the AX-100 can be sold without navi manager..
Good Luck,
Glen.