Hi, we have a cx300 that we have purchased a new disk tray for. the cx300 is currently NOT providing any disk to any servers. I can shutdown or reboot the cx300 if required.
What is the procedure for installing a new disk tray?
Is it as simple as plugging in the tray using the cabling diagram and then powering on the tray.
Can i do this while the CX300 is powered on? Will the cx300 ocik up the new tray automatically?
Do i need to check firmware on the tray and compare it to the firmware/flare code on the cx300 to make sure that they are compatible with each other?
I have a document for configuring a cx300 from scratch but cannot find one for adding an additional tray - is there one available online?
I should add, download the "Customer CLARiiON Procedure Generator" available on PowerLink. This will help you with both installing the NST and then the disk tray (DAE)
I wouldn't advise you to do the expansion yourself. Call EMC or your customer engineer to do it for you as warrenty violation will be no issue then. Also the CE will do an overall check of the Clariion to make sure everything is as it should be, such as the Flare code (for example: using the new 750GB drives requires Flare 24 on an older CX-series Clariion).
houndfish
53 Posts
240
0
Posted September 19th, 2007 08:00