server_param  server_2   -facility   trunk   -modify   LoadBalance   -value   tcp

Thanks

Hi,

just note that it's required to reboot or failover/failback the Data Mover to be effective.

[root@SBR00MN03 Log]# server_param  server_2   -facility   trunk -i LoadBalance
-v
server_2 :
name                    = LoadBalance
facility_name           = trunk
default_value           = ip
current_value           = tcp
configured_value        = tcp
user_action             = reboot DataMover
change_effective        = reboot DataMover
range                   = *
description             = Specifies the load balance method

detailed_description
Specifies the default method to use to do the statistics-based load balancing. . mac - uses the source and destination MAC addresses
of the outbound packet to select the link.  It is effective when the majority of the remote hosts DO NOT go through the routers. .
ip - uses the source and destination IP addresses of the outbound packet to select the link.  It is effective when remote hosts  are
on the local LANs or reached through routers.  . tcp - uses the source and destination TCP  port numbers of the outbound packet to
select the link. Potentially, different connections  on the same remote hosts can select different links. The parameter uses the fol
lowing syntax: param trunk LoadBalance= Example of setting the statistical load balancing to be
TCP: param trunk LoadBalance=tcp

Gustavo Barreto.