UNSOLVED

walkindakat

updated

17 years ago

W

walkindakat

1 Rookie

•

27 Posts

0

981

September 3rd, 2009 04:00

Avamar replication

If you have a main site and a connected second site, would it be preferable to have one Avamar on the main site replicating to a second Avamar unit on the second site

or

No Avamar unit on the main site but the main site backing up to an Avamar unit on the second site?

Thanks
  • clevya

    117 Posts

    205

    0

    Posted September 3rd, 2009 08:00

    Please see page 17 and 18 of the operational best practices guide, which goes into detail on this subject and gives the pros and cons for each option

    Operational Best Pratices Guide: http://powerlink.emc.com/km/live1/en_US/Offering_Technical/Technical_Documentation/300-007-035.
  • Randeep_Singh

    1 Rookie

    •

    74 Posts

    205

    0

    Posted September 4th, 2009 22:00

    According to operational best practise unless you cannot meet your restore time objectives, architect the system so that clients back up directly to a large active centralized Avamar server and then replicate data to another large passive centralized Avamar server because the restore can be done directly from that server across the local area network to the client. This is important if a recovery time objective (RTO) requirement must be satisfied.
  • 205

    0

    Posted September 17th, 2009 02:00

    The best choice would be to have an Avamar replication source at the main site and an Avamar replication target at the secondary site.

    This would give you both redundancy in case of primary site failure and the best chance of meeting the customer's Recovery Time Objective.

    If you have clients at the secondary site you would also have the same advantage of redundancy and RTO by cross replicating with the primary site.