The OIDs in the 1000 range are the Notifications and will be delivered using SNMP traps. As such, you can't query them directly. The OIDs in the 2000 range are used by the MIB compiler for compliance per RFC 2580: http://rfc-ref.org/RFC-TEXTS/2580/chapter5.html.
I'll see if I can get this clarified in the documentation.
As I mentioned above, you can not call getnext on those OIDs. The 1XXX OIDs will be sent when SNMP client sends your manager an asynchronous trap and the 2XXX OIDs are used internally by the MIB compiler.
Hi Jason, we're trying to only read the values that should respond. Somehow we only get an snmp response from the master node of each IS. the second node does not respond. The second node in both rmgs only delivers 3.1 and 3.10 values. the ones 80 and higher are not delivered. Holger
JasonCwik
1 Rookie
•
281 Posts
335
0
Posted February 13th, 2012 15:00
Hi Holger,
The OIDs in the 1000 range are the Notifications and will be delivered using SNMP traps. As such, you can't query them directly. The OIDs in the 2000 range are used by the MIB compiler for compliance per RFC 2580: http://rfc-ref.org/RFC-TEXTS/2580/chapter5.html.
I'll see if I can get this clarified in the documentation.