UNSOLVED

Deputydaves

updated

5 years ago

D

Deputydaves

1 Rookie

•

8 Posts

0

806

May 13th, 2022 18:00

17 R5, RTX 2070, won't do dual monitors 4K resolution

this m17 R1 thread. DELL-Admin>

I have a AW 17 R5 model and it won't do a two 4K monitors with resolution of 4K with RTX 2070 too. 

I have two external 4K led monitors I want to run for video editing. I have one on my USB-C port (that’s run off the Intel). That works fine through the Intel card and I have 4K with that setup. BUT, when I hook up the 2nd monitor that gets controlled thru Nvidia card, then the problems start. I did have the 2nd monitors working through the DP port to the monitors DP port. It worked for a couple of days then one morning I got a "no signal" on the Nvidia controlled DP port monitor. I panicked!  I used a DP to HDMI cable and that worked fine for a day or two until that stopped working too. Now I have it working again thru the HDMI TO HDMI cable but I can't get 4K out of it. Everytime I try to switch to 4K in Nvidia control panel the picture is way too big (scaled up) for the monitor. I use the cursor a little then the screen goes black, flickers a bit then sometimes it goes back to 1920x1080. Other times i just get "no signal".The only way to get a signal out of the HDMI cable is to unplug both ends reboot my 17 R5 then plug the HDMI cable back in. Whats up with that?!

Somewhere I read there's a conflict between Intel & Nvidia controllers. Somewhere I read I should turn of the intel but if I do that then my 17 R5 laptop won't display nothing.

Please help. 

  • crimsom

    9 Technologist

    •

    6114 Posts

    505

    0

    Posted May 13th, 2022 22:00

    Hi @forecastmantis welcome to this free user to user Alienware laptop discussion forum. This is not Dell Support. 

    Please have a look at Solved: m17, with dual Thunderbolt monitors - Dell Community 

    These ASUS VP28U monitors seemingly do not have Thunderbolt 3 port. 


    [This user does not work for Dell and volunteers their free time. Please remember to say thank you by clicking on my thumb up icon.]

  • Deputydaves

    1 Rookie

    •

    8 Posts

    495

    0

    Posted May 14th, 2022 05:00

    @Crimson and others, thnx ill try "certified" thunderbolt 3 SPLITTER into a dual HDMI output with 1.2 cables

  • crimsom

    9 Technologist

    •

    6114 Posts

    465

    0

    Posted May 15th, 2022 01:00

    Hi @Deputydaves thank you for sharing update. 

    Support for Alienware 17 R5 Setup and Specifications Ports and connectors. See also Guide to Thunderbolt™ 3 | Dell US.  

    Please consider How to Daisy Chain Multiple Monitors Using DisplayPort Multi-Stream Transport (MST) | Dell US 


    [This user does not work for Dell and volunteers their free time. Please remember to say thank you by clicking on my thumb up icon.]

  • Deputydaves

    1 Rookie

    •

    8 Posts

    460

    0

    Posted May 15th, 2022 05:00

    @crimsom thnx but my 4k monitors r not daisy chainable.  Sorry 2 say because I do like a tidy cable management.  But ill do like I always do,  zip ties! 

     I have been doing alot of research on cable specs.  I think I understand what is happening.  I will us a thunderbolt3 to 2 HDMI outputs @ 4k 60hz  splitter capable of 48ghz transmission. I found 2 HDMI 8k cables (over kill I know) that will work fine.   My problem is the limitations of my Alien M17 R15 outputs. When I switch to 8k or higher I will have to get a new Computer. 

     Thnx for opening my eyes to my dilemma. Parts rcoming monday and my Premiere Pro is encoding until tues so I have 2 wait patiently. 

    1652613998066.png