glockt

updated

6 years ago

G

glockt

1 Rookie

•

21 Posts

0

10145

September 18th, 2019 08:00

Aurora R7, Overclocking

The Aurora R7 motherboard keeps downclocking my speeds to the default AVX offset of -3 while no AVX instructions are running. Quite irritating. I will not turn off AVX because several of my games require it.

AWCC only allows up to 5ghz overclock with no option to change AVX offset. So I resorted to Intel Extreme Tuning Utility.

I am able to temporarily set an overclock of 5.1ghz and AVX offset of -0, but after putting my computer to sleep or reboot the overclock reverts back to 5.0 and the AVX offset to -3.

I changed my overclock in BIOS to 5.1 and it still reverts back to 5.0 when I boot up. I'd like to mention that Dell didn't include AVX offset settings in BIOS...

Any suggestions?

  • amstel78

    2 Intern

    •

    402 Posts

    6107

    0

    Posted September 18th, 2019 09:00

    As you've already discovered, Dell's BIOS is very limited when it comes to OC options. I myself have already hit the 5GHz ceiling, and that's because of the limitations Dell bakes in (plus stock AIO gets heatsoaked quickly). Even with Intel's XTU, the UEFI ends up overwriting whatever gets set if it exceeds hard coded limits. They do it so end users don't end up killing or frying components and filing warranty claims.

    I'm surprised there are games that use AVX.  Which titles?

  • glockt

    1 Rookie

    •

    21 Posts

    1544

    0

    Posted September 18th, 2019 09:00

    Yes we are hamstrung here by what you said earlier.

    Not it will always revert back to 5ghz with an AVX offset -3

  • glockt

    1 Rookie

    •

    21 Posts

    6090

    0

    Posted September 18th, 2019 09:00

    No any AVX offset on will cause the clock speeds to bounce around between the range.

    Low 30s idle and mid 60s during games.

    Assassin's Creed Odyssey I was in the 70s though. That game is like 80-100% cpu usage.

    The lower voltage helps so much

  • amstel78

    2 Intern

    •

    402 Posts

    6092

    0

    Posted September 18th, 2019 09:00

    Yeah, I think Dell's throttling AVX back to -3 to prevent cooking the chip... especially at 5.1 GHz.  Will the AVX setting stay at -2, or -1 offset?

    What were your average core temps at 5.1 with a 0 offset?  Must have been toasty.

  • glockt

    1 Rookie

    •

    21 Posts

    6068

    0

    Posted September 18th, 2019 09:00

    Yes all cores are locked.

    If I set it 4.7 and AVX to 0, the settings stick but I want 5.0.

    I have no issues with heat soak or throttling because I already undervolted.

    We both got lucky

  • amstel78

    2 Intern

    •

    402 Posts

    6071

    0

    Posted September 18th, 2019 09:00

    Shouldn't bounce if you lock all cores though.  Try lowering clock speed to 4.7 or 4.8 and setting AVX offset to 0 and see what happens. Might try undervolting (if stable) to minimize heat soak and throttling.

    I don't know if AW uses binned chips.  Maybe I just got lucky.

  • glockt

    1 Rookie

    •

    21 Posts

    6098

    0

    Posted September 18th, 2019 09:00

    Oh sorry I missed the question.

    Far Cry New Dawn, Risk of Rain 2, Watch Dogs 2, Total War Warhammer 2.

    There are a few others I can't think of right now.

  • amstel78

    2 Intern

    •

    402 Posts

    1552

    0

    Posted September 18th, 2019 09:00

    I wanted you to test to see if there was some correlation with the way the Dell BIOS treats clock speeds and AVX ratios.  From the looks of it, there probably is that won't let you go past 5 GHz with AVX set to anything less than -3.

    Can you go past 5 GHz and have it stick in BIOS with AVX to -3?

  • glockt

    1 Rookie

    •

    21 Posts

    6090

    0

    Posted September 18th, 2019 09:00

    Your voltage is quite low as well! That's one thing I was wondering. My 8700k seems to undervolt quite well and you 1.1v is probably running chilly. Does Alienware get binned cpus??

  • glockt

    1 Rookie

    •

    21 Posts

    6102

    0

    Posted September 18th, 2019 09:00

    Ah yes I've already suspected this but I was hoping someone knew a way around.

    Unfortunately for me, I'm not limited by voltage. I am actually running 5ghz at 1.2v so thats why I wanted to go further.