Oldozbloke

updated

2 months ago

O

Oldozbloke

1 Rookie

•

8 Posts

•

25 Points

0

422

September 20th, 2026 13:23

XPS 8940, F12 Boot Menu Malfunctioning

XPS 8940 running Windows 10 Pro and Windows 11 Pro on separate internal drives.

 

Been running this setup for years without any issues and, when changing between operating systems, I would normally bring up the boot menu (F12) and choose which drive to boot from. However, all of a sudden, when I choose the second drive, instead of booting from that drive it goes to some random BIOS setting.

 

Just to clarify; say I'm running Windows 10 and want to change to Windows 11, I go to the boot menu and select the Windows 11 drive but I am getting some random BIOS setting instead.

 

I can still go into BIOS and change the boot order to achieve the changeover but It's more convenient to use the F12 boot menu. Plus, there is obviously something amiss which needs fixing.

 

I tried downloading and applying the latest available BIOS update but that made no difference.

 

It's a weird one and I am at a loss. Any advice would be gratefully received.

(edited)

  • Oldozbloke

    1 Rookie

    •

    8 Posts

    •

    25 Points

    53

    1

    Posted September 23rd, 2026 07:42

    This issue has now been resolved. I restored an image backup from 7th September, which was prior to the latest Windows Update, and everything is now back to normal. I can only guess that the subsequent Windows Update messed up the boot partition somehow.

     

    Thank you to everyone who offered assistance, I appreciate your time and effort.

    (edited)

  • DELL-ChrisM2

    Community Manager

    •

    2013 Posts

    •

    10057 Points

    38

    0

    Posted September 20th, 2026 13:30

    "getting some random BIOS setting"

     

    To better allow our users to assist in troubleshooting, post a picture of the BIOS screen showing random setting.

     

    #IWork4Dell

  • Oldozbloke

    1 Rookie

    •

    8 Posts

    •

    25 Points

    28

    0

    Posted September 20th, 2026 13:53

    @DELL-ChrisM2​ It's been a different BIOS setting each time. Right now, it's consistently bringing up a "DELL SupportAssist | Pre-Boot System Performance Check" window with a scan feature. That's a pain because my mouse isn't working in that window and I'm struggling to close it out.

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    17

    0

    Posted September 20th, 2026 16:28

    @Oldozbloke​ ,

     

    Right now, it's consistently bringing up a "DELL SupportAssist | Pre-Boot System Performance Check" window with a scan feature. That's a pain because my mouse isn't working in that window and I'm struggling to close it out.

    You should be able to disable that nonsense in the BIOS options.

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • Oldozbloke

    1 Rookie

    •

    8 Posts

    •

    25 Points

    12

    0

    Posted September 20th, 2026 17:09

    @Tesla1856​ 

     

    In BIOS under "SupportAssist System Resolution" I disabled the following settings:

     

    Auto OS Recovery Threshold - Set to OFF

    SupportAssist OS Recovery - disabled

    BIOSConnect - disabled

     

    However, it is still booting to that same "DELL SupportAssist | Pre-Boot System Performance Check" window. I cannot locate any other settings related to SupportAssist.

     

    The only way I can get out of that Dell SupportAssist Pre-Boot System Performance Check window is via hard shutdown (holding down the power button) so I am reluctant to keep going there.

  • anne_droid

    6 Operator

    •

    2671 Posts

    •

    9821 Points

    12

    0

    Posted September 21st, 2026 09:42

    Hi

           

    If you applied the ABSOLUTELY EXCELLENT boot managing software that is rEFInd you will be pleasantly surprised with the difference.

     

    No F12 needed.    

      Kind Regards  

                                         

      anne_droid

     

    User uploaded image

     

  • Oldozbloke

    1 Rookie

    •

    8 Posts

    •

    25 Points

    14

    0

    Posted September 21st, 2026 10:54

    @anne_droid​ 

     

    Thanks for the suggestion, but... setting up a dual boot system is precisely what I'm trying to avoid. My experience with EasyBCD was that it is very easy to set up but, if for some reason one wants to change back to a single boot (for example), getting rid of it is very much more difficult.

     

    Besides, while rEFIt might be an excellent option, it is more of a workaround for my issue rather than a solution.

  • anne_droid

    6 Operator

    •

    2671 Posts

    •

    9821 Points

    10

    0

    Posted September 22nd, 2026 11:04

    @Oldozbloke​ 

    rEFIt or the latter rEFInd would just sit in the first partition of the first drive and would easily be deleted.

     

     

     

      Kind Regards  

                                         

      anne_droid

     

    User uploaded image

     

  • anne_droid

    6 Operator

    •

    2671 Posts

    •

    9821 Points

    5

    0

    Posted September 22nd, 2026 11:09

    Hi

     

     

     

    Disable automatic SupportAssist launch
    1. Power the Dell off completely.

    2. Power it on and repeatedly tap F2 at the Dell logo.

    3. In BIOS, expand one of these sections, depending on model/BIOS version:

      • SupportAssist System Resolution

      • SupportAssist

      • Update, Recovery

    4. Open SupportAssist OS Recovery.

    5. Set/clear:

      • SupportAssist OS Recovery → Disabled

      • Auto OS Recovery Threshold → Off or Never, if present.

    6. Press Apply, then Exit or F10 to save.

    Dell documents this setting as the control for the automatic start of SupportAssist OS Recovery.dell

    Do not uninstall the Windows SupportAssist application expecting this to fix it—the pre-boot component runs from firmware/recovery storage, before Windows loads.

    (edited)

      Kind Regards  

                                         

      anne_droid

     

    User uploaded image

     

  • Oldozbloke

    1 Rookie

    •

    8 Posts

    •

    25 Points

    34

    0

    Posted September 22nd, 2026 11:23

    @anne_droid​ 

     

    I've already done that. Please see my earlier reply to "Tesla1856".