I assume this user only has 1 VM, right? The zero toolbar has been disabled by default for these users as noted in Release Notes.

::Excerpt from Release Notes::
Wyse Xenith Toolbar Disabled by Default for Single Session Users
o If a user only has one session, the Wyse Xenith toolbar will be disabled. However, using CTRL+ATL+DOWN will still minimize the session and take the user to the Home screen.
o This default setting can be changed through the GUI settings or INI parameters
::::::

There is a checkbox in the local GUI that says something like "disable toolbar for single desktop" or you can just have user hit CTRL-ALT-UP (I believe thats the hotkey for bring out the toolbar regardless of automatic setting).

Hi,

okay the hotkeys als don't work on my xenith with default settings. So I need to enable the zero toolbar via central configuration.

Regards,
Michael

Thank you. Hopefully the INI setting will be added in a future release then.

o This default setting can be changed through the GUI settings or INI parameters

What is the ini parameter for this? I could not find it in the release notes.

jballard- looks like you are right, its only a GUI setting but no INI exists at this time. As a workaround, you can use CTRL-ALT-DOWN to minimize the desktop and get to the "home" connection screen

Thank you! That will be good.

This should be part of Xenith 1.6 (available later in July). "SysMode=VDI ToolbarEnableOneSession=yes"

FYI- code is released and available on self-service site