UNSOLVED

ORiley

updated

20 years ago

O

ORiley

57 Posts

0

14580

November 12th, 2006 17:00

Error Checking Ends With Blue Screen

While running the error check it will get maybe 50% through the first phase then a blue screen pops up for half a second then it reboots, over and over and over.
 
Reboot..."press any key to cancel scan"....bang keys to no avail.  Blue screen, reboot over and over.  Finally, about the 10th time or so the scan finally cancelled and all is well.
 
I'm thinking I could take a picture of the blue screen to see what it says, only stays up half a second, but I'm worried I won't be able to stop the rebooting.  Any ideas?
 
Thanks, Oriley
 
8200
SP2
  • BigBrother

    2 Intern

    •

    4801 Posts

    667

    0

    Posted November 12th, 2006 17:00

    ORiley,
     
    What error check are you running?  Hard drive scandisk?  memory test?
     
    Steve
  • ORiley

    57 Posts

    669

    0

    Posted November 12th, 2006 17:00

    Hard drive.  Only way I could get it to stop was to go into the F2 window.  For whatever reason it finally stopped the scan after maybe 15-20 times.
  • BigBrother

    2 Intern

    •

    4801 Posts

    669

    0

    Posted November 12th, 2006 17:00

    ORiley,
     
    If your hard drive scan gives you a BSOD, the most likely point of failure is the hard drive.  It is possible, however, that your system RAM is causing this as well.   Disconnect the hard disk drive, boot to the Dell Resource CD and run diags on RAM.  If the memory diagnostics pass, then I would suggest replacing the hard disk drive. 
     
    Steve
  • ORiley

    57 Posts

    669

    0

    Posted November 12th, 2006 18:00

    Dimension 8200
  • ORiley

    57 Posts

    669

    0

    Posted November 12th, 2006 18:00

    I know how to unplug the hard drive, not sure about the rest.  Do I just turn on the computer then insert the CD in the dvd drive?
     
    Sounds like you think my hard drive could be going bad?  Geeezzzz.
     
    Thanks
     
    Oriley
  • BigBrother

    2 Intern

    •

    4801 Posts

    669

    0

    Posted November 12th, 2006 18:00

    ORiley,
     
    After unplugging the hard drive power and data cables, start the computer with the Resource CD inserted into the CD drive.  The system should boot to the CD.  When it does, type in delldiag and press enter.  The diagnostic program should run.  If you prefer, you can download the diagnostics for your particular system from this link:
     
     
    Select the memory test or RAM test from the availalbe options.
     
    Steve
  • ORiley

    57 Posts

    669

    0

    Posted November 12th, 2006 18:00

    Thank you very much, Steve, I appreciate the help. 
     
    I think I'll order another hard drive whatever I find.
     
    Oriley
  • BigBrother

    2 Intern

    •

    4801 Posts

    669

    0

    Posted November 12th, 2006 18:00

    ORiley,
     
    Inspiron 8200 or Dimension 8200?
     
    Steve
  • BigBrother

    2 Intern

    •

    4801 Posts

    669

    0

    Posted November 12th, 2006 19:00

    ORiley,
     
    You are welcome. 
     
    Steve
  • ORiley

    57 Posts

    201

    0

    Posted November 12th, 2006 23:00

    Steve,
     
    Memory checked out OK so I guess it's time for a new hard drive or two.
     
    Thanks again,
     
    Oriley