UNSOLVED

Mhoel

updated

19 years ago

M

Mhoel

2 Posts

0

1549

December 17th, 2007 15:00

DVD issues

I've recently reinstalled Vista Ultimate, and when I put dvd movies in, my computer can't find the dvd. Sometimes it starts as normal, but most times, the dvd start spinning like h... like the computer is about to lift off. And it just spins like this forever, whitout finding the startup file. And off course, it is not possible to eject the slot so I have to kill the machine.
Any suggestions on what I've done wrong/what is wrong with my computer?
 
  • viewmontny

    52 Posts

    278

    0

    Posted December 17th, 2007 16:00

    Is this an old DVD drive? It sound like it may be on its way out. Also make sure your DVD's are clean and not heavily scratched.
  • Mhoel

    2 Posts

    278

    0

    Posted December 18th, 2007 15:00

    The dvd's are clean and clear. And my player is brand new. Just recieved my new portable, which is a Inspiron 1720. But I have formatted it and reinstalled it with Vista Ultimate, instead of the basic version. And I've replace most of the drivers from the support site. Never experienced similar things. But when I go into device manager, I get two drives. One RZ3392 TXH143V SCSI cdrom device, and one TSSTcorp DVD+-RW TS-L632H ATA Drive. I've uninstalled both, and then scanned for hw changes and they both reappear. It migth be that one of these is due to installation of a daemon tool.
    In the properties of those, I find the correct Zone settings for dvd's on one of the drives. On the other, there hasn't been set a zone. When I then try to set the zone, it gives me feedback that I can't do this until I have a valid dvd with the correct zone in the drive. Which I off course have. But this doesn't help.
    So, any suggestions on what to do will be appreciated.
  • viewmontny

    52 Posts

    278

    0

    Posted December 18th, 2007 15:00

    Did you have this problem before you reformatted and installed Vista ultimate?
  • Rebel9

    1 Rookie

    •

    2856 Posts

    278

    0

    Posted December 18th, 2007 16:00

    Have you tried temporarily uninstalling the daemon tool to see what happens? I believe that your actual drive is the TS-L632H. There is a firmware update (marked Urgent) that resolves many issues with this drive.