UNSOLVED

scott784

updated

20 years ago

S

scott784

388 Posts

0

24614

February 23rd, 2007 23:00

Do you have a Dell XPS 410 with a just one hard drive "and" factory installed Vista?

Please read my header line.  I am very interested in hearing from someone with a Dell XPS 410 with a single drive and factory installed Vista (You had it delivered after January 30th '07).
 
Okay, before I get to my question, here's my situation.  I have a 3 month old Dell XPS 410 that was shipped with one hard drive and obviously came factory installed with Win XP.  Like some other people on these boards, I decided to buy the full version of Win Vista retail and ran into a fit trying to get Vista to install.  Long story made short here, I discovered that Vista is NOT currently set up to handle the Raid Technology that is put on these particular models.  So unless you can feed the setup screen drivers (obviously from external media) when you are attempting to install Vista, you get the BSOD (blue screen of death).
 
Now for the question, to any of you with the above computer in my header line.  Can you please tell me if your computer was shipped with "raid on" in your BIOS or is the setting "autodetect"?  If you do not know how to check your BIOS, you can easily tell if the setting is "raid on".  During the bootup of your computer (every time), it will tell you that your Sata hard drive is controlled by the Raid Technology or some words to that affect.  If those of you (again that have the above computer) don't see anything about raid technology when you boot up your computer, then that means raid is NOT set to the "on" position.
 
I am very curious to know the answer to this for the following reason.  Many of us with this particular model and some others experienced a fit while trying to get Vista loaded using the retail version of Vista (to replace XP).  The setup prompted for missing drivers but didnt say what it was.  After muchado, I determined that it was those raid drivers.  My solution was to cutoff the Raid technology in my system since I don't have a raid array.
 
BUT, if your system is showing "raid on", again you will know during bootup because it will say the hard drive is controlled by Raid technology......THEN that tells me that Dell has loaded external drivers on your machine that allowed Vista to work.  So this is why I am asking the question.  I spent so much time dealing with my own problem and trying to help others, I am VERY curious to know what YOUR situation is with these new Dells shipped since Jan 30th.  Thank you very much for any post.
 
  • ayabrea

    9 Posts

    525

    0

    Posted February 23rd, 2007 23:00

    Hello,
    Btw, is XPS410 and Dimension 9200 the same computer?
  • dave51_2fe887

    2 Intern

    •

    1286 Posts

    525

    0

    Posted February 23rd, 2007 23:00

    I recieved my 410 2/19/07 it has :
    Vista
    Raid On in bios (single hardrdrive)
    Have a look at the link below, it is for earlier XPS & 8400 but it should help. Read the bottom
    paragraph about the Bios setting.
     
  • dave51_2fe887

    2 Intern

    •

    1286 Posts

    525

    0

    Posted February 23rd, 2007 23:00

    Yes.
  • scott784

    388 Posts

    525

    0

    Posted February 24th, 2007 00:00

    Yes, I believe the Dimension 9200 is the equivalent to the XPS 410.


    Message Edited by scott784 on 02-23-2007 08:33 PM
  • scott784

    388 Posts

    525

    0

    Posted February 24th, 2007 00:00



    Message Edited by scott784 on 02-25-2007 03:27 AM
  • dave51_2fe887

    2 Intern

    •

    1286 Posts

    525

    0

    Posted February 24th, 2007 00:00

    I do have the Intel Matrix Storage Manager R139843 on my Drivers and Utilities CD.
     
     
  • scott784

    388 Posts

    525

    0

    Posted February 24th, 2007 00:00

    Thanks Dave,
    Yes, I have seen that link before.  That link describes a reinstallation of XP versus Vista.  However, it is similar to the problem I described in that Vista setup fails after getting several screens into the attempted installation.  One solution IS to turn off the raid in the BIOS which WILL allow Vista to install on the XPS 410 (that shipped before the launch of Vista).  However, some people do not want to turn off their raid setting in the BIOS because it means they cannot migrate to a raid array in the future (with another hard drive) without crashing their computer all over again. 
     
    Apparently on the XPS 410 systems that shipped recently (prior to the launch of Vista) all came with a default BIOS setting of raid on (even when the system only shipped with one hard drive).  This was never a problem UNTIL you then tried to do a clean install of Vista.  Because the current release of Vista does NOT have drivers for Raid Technology, people (such as myself) that have relatively new systems (XPS 410 machines and similar) encountered this horrible problem while trying to replace XP with Vista.  The most frustrating part about it was the fact that Vista setup does NOT tell you specifically what drivers it is looking for, just a screen to load drivers.  Then people get blue screened (the blue screen of death) as soon as they click enter to try to continue with setup.  I determined the problem was Raid and the fact that Vista does NOT have the drivers on there to support it.
     
    The reason that I asked people (like yourself) with one hard drive if your raid is cut on (you see it during bootup) is because that helps answer my question about whether or not Dell is supplying external drivers (to the Vista DVD) to make it work before it leaves the factory.
     
    Because you have stated that your Raid setting is turned on (obviously you don't have a raid array because you have one hard drive only) BUT again your raid setting is turned on.......that tells me that Vista was allowed to load because Dell "did" supply the proper drivers on your OEM software that allows Vista to load without getting bluescreened.
     
    This tells me that YES there is a workaround with leaving the raid setting on and that Dell knows about it.  Unfortunately, this issue has not been made very well known to the many people who had Dells shipped to them with XP factory installed and are now trying to get Vista loaded.  (A number of people have bought retail versions of Vista since the Dell OEM version has been very slow to ship).
     
    Like so many other people, I don't have the upgrade DVD from Dell yet, BUT I did buy the full retail version of Vista (which is supposed to be basically the same thing as your OEM version of Vista).  However, the difference obivously is the fact that "you" must have the appropriate drivers for raid on your Dell OEM media that is allowing your Vista to work WITH the raid setting left in the BIOS as "raid on".
     
     






    Message Edited by scott784 on 02-25-2007 03:30 AM
  • dcgtls

    2 Intern

    •

    940 Posts

    525

    0

    Posted February 24th, 2007 01:00

    The Dell OEM Windows Vista DVD already has the RAID drivers in it and that is why you will be able to install with out any need for a floppy with the Raid drivers. The same goes for the Dell OEM XP CD. Microsoft does not include any of the extra drivers into the CD/DVD for the bootup because there are just too many out there. There is a way that you can slipstream the drivers into the retail DVD of Vista. I do not have the info handy but you can use the advanced search option. I have seen this discussed in several threads before with links for the needed applications to do this.
    Hope this helps.
    Dave
  • scott784

    388 Posts

    525

    0

    Posted February 24th, 2007 05:00

    Thank you Dave for the reply.  I will try to find the link you described about slipstreaming the raid drivers into the retail DVD of Vista.  Meanwhile, if you get time, (and can remember where you saw it), I would certainly appreciate the info.
     
    Short of slipstreaming the drivers into Vista, is it possible to just download the Intel Matrix Storage Manager file R139843 (as described above) and put it on external media like a floppy or CD.  "Then" when retail Vista prompts for drivers during the setup, just insert the media with that R139843 file?  Would this work?
     
    Dave or anyone else want to take a shot at this?  Thanks for any replies.


    Message Edited by scott784 on 02-24-2007 01:36 AM
  • dcgtls

    2 Intern

    •

    940 Posts

    103

    0

    Posted February 25th, 2007 02:00

    Yes you can do that also. When you boot off of the Vista DVD just watch for the prompt to press F6 for the drivers on a floppy.


    Message Edited by dcgtls on 02-24-2007 08:58 PM