I thought I could use the USM (current version 1.2.0.1.0554) with a VNXe3100 but it wont login and I cant find a replacement under downloads under the VNXe pages in Powerlink.
Does anyone know how I would perform diagnostics and software upgrades as I used USM on NX4s etc?
Their currently is no desktop client for VNXe upgrades or diagnostic collection.
EMC Unisphere Server is used strictly in VNX environments. Unisphere Server is an “off-array” management system running the Unisphere management server. It allows a Windows server to become a VNX storage domain member.
Domains to not pertain to VNXe systems, so this software is not relevant in VNXe environments.
Thanks Mike, I know there's the options there, just I was hung up wanting a desktop client. I found the below in PL but just like the USM, it installs but upon entering credentials, it fails to connect. Its mentions VNX but not VNXe I note.
EMC Unisphere Server is used as a host based version of EMC™ Unisphere management tool for the Windows environment. For use with VNX, Celerra and CLARiiON systems. Version 1.2.
Software updates and health checks can be performed right from Unisphere on the VNXe. Navigate to the Settings tab and you will see an "Update Software" option. From here, you can upload the VNXe OE that you downloaded from EMC Online Support and perform an upgrade, or run a health check.
There is no such tool available to analyze the VNXe logs. Only trained EMC support personnel can understand it. If you have any problem, please search for relavent KB or open a support case.
eerreer
2 Intern
•
130 Posts
1296
0
Posted August 23rd, 2012 08:00
Their currently is no desktop client for VNXe upgrades or diagnostic collection.
EMC Unisphere Server is used strictly in VNX environments. Unisphere Server is an “off-array” management system running the Unisphere management server. It allows a Windows server to become a VNX storage domain member.
Domains to not pertain to VNXe systems, so this software is not relevant in VNXe environments.