Andy0301

updated

17 years ago

A

Andy0301

9 Posts

0

3404

January 19th, 2010 08:00

CX accessing a Lun

I have zoned my host Hba FC port to cx SPA1 port(Only one Zone), and I regestered this path with clariion then i carved out a lun (LUN7) which is owened by SPB,  Then i put it in a storage group which has this LUN7 and Host

Since there is only one Zone to SpA and lun is owend by spb, I am not really sure if my host can access the lun.

Please some one help me out

Thank you

Andy

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    329

    0

    Posted January 19th, 2010 11:00

    yes, trespass the LUN to SPA and your host should see it.
  • Andy0301

    9 Posts

    329

    0

    Posted January 19th, 2010 08:00

    I was just curious to know if it can access the lun or not ...

    Please help me


    Thank you for the reply

    Andy

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    329

    1

    Posted January 19th, 2010 08:00

    you can trespass the LUN to SPA, but the question is why don't you zone your host to SPA and SPB ? EMC recommendation is to zone like this:

    HBA1 - SPA0/SPB1

    HBA2 - SPA1/SPB0

    basically you want each HBA to be zoned to SPA and SPB for better failover/throughput.

  • bharath_25

    29 Posts

    329

    0

    Posted April 5th, 2010 14:00

    We should primarly zone the HBA to SP port that has ownership to LUN and secondary path should be from a different SP port. In case if the primary path fails a LUN tresspass occurs with the available secondary path.

    Regards

    Bharath