Will Restoring My PC to Factory Settings Remove Virus?
A few days ago on my PC (I'm using another right now) my internet started freezing up, then my ctrl, alt, del would not work or freeze, and or my cursor would freeze. I had to reboot the computer several times but a virus scan turned up nothing. Now it happens after a few minutes and everything freezes up. A scan with AVG Free detected some virus but the scan froze and I didn't record the virus' name, because I knew I could check the scan log and delete it, but the scan log was corrupted. Now it can't get through one scan. I tried a restore point to before it started acting up but it didn't work. I have run out of options except taking it in to a shop to get it removed for money, restoring it to factory settings, or reinstalling Vista, which I've had to do twice for non-viral problems with Vista. Can anyone tell me if restoring to factory settings will guarantee the removal of the virus?
I can't download it. It loads much slower than it should, and when it finishes, the dialog box freezes so it doesn't finish downloading to my desktop. Running it instead of saving it didn't give enough time because it froze mid installation.
Here are 3 error messages that popped up when things really got bad:
Error message 1: eplorer.exe-Application Error
The instruction at 0x75f686b4 referenced memory at 0x7350b938. The required data was not placed into memory because of an I/O error status of 0xc0000056
Double-click on mbam-setup.exe to install the application.
When the installation begins, follow the prompts and do not make any changes to default settings.
When installation has finished, make sure you leave both of these checked:
Update Malwarebytes' Anti-Malware
Launch Malwarebytes' Anti-Malware
Then click Finish.
MBAM will automatically start and you will be asked to update the program before performing a scan.
If an update is found, the program will automatically update itself.
Press the OK button to close that box and continue.
If you encounter any problems while downloading the updates,
manually download them fromhere and just double-click on mbam-rules.exe to install. Alternatively, you can update through MBAM's interface from a clean computer, copy the definitions (rules.ref) located in C:\Documents and Settings\All Users\Application Data\Malwarebytes\Malwarebytes' Anti-Malware from that system to a usb stick or CD and then copy it to the infected machine.
On the Scanner tab:
Make sure the "Perform Quick Scan" option is selected.
Then click on the Scan button.
If asked to select the drives to scan, leave all the drives selected and click on the Start Scan button.
The scan will begin and "Scan in progress" will show at the top.
It may take some time to complete so please be patient.
When the scan is finished, a message box will say "The scan completed successfully.
Click 'Show Results' to display all objects found".
Click OK to close the message box and continue with the removal process.
Back at the main Scanner screen:
Click on the Show Results button to see a list of any malware that was found.
Make sure that everything is checked, and click Remove Selected.
When removal is completed, a log report will open in Notepad.
The log is automatically saved and can be viewed by clicking the Logs tab in MBAM.
Copy and paste the contents of that report along with a fresh HijackThis log into your next reply and exit MBAM.
Note:-- If MBAM encounters a file that is difficult to remove, you may be asked to reboot your computer so it can proceed with the disinfection process. Regardless if prompted to restart the computer or not, please do so immediately. Failure to reboot normally (not into safe mode) will prevent MBAM from removing all the malware.
-- MBAM may make changes to your registry as part of its disinfection routine. If you're using other security programs that detect registry changes (like Spybot's Teatimer), they may interfere with the fix or alert you after scanning with MBAM. Please disable such programs until disinfection is complete or permit them to allow the changes.
* If you are unable to download or install MBAM on your computer, see if you can use a friend's or family member's computer to download MBAM. Use the update link mentioned above to manually update. Once downloaded, rename the program installer "mbam-setup.exe" file to something else like "lookinhere.exe". Copy the installer file and the update file to a CD or flash drive. Transfer the file to the infected computer. Install the "lookinhere.exe" file, then run the update so that you will have the current definitions. After that, run a full system scan and select to have the program REMOVE whatever it finds.
I'll try the DDS thing but first I wanted you to know I got the malwarebytes thing to install but it freezes after about 12,000 files, and the computer restarts on its own unsuccessfully. Also, how do I disable script blocking protection?
See if you can download DDS and save it to your desktop.
Disable any script blocking protection
Double click dds.scr to run the tool.
When done, DDS.txt will open.
Click Yes at the next prompt for Optional Scan.
Save both reports to your desktop.
--------------------------------------------------- Please include the contents of the following logs by copying and pasting the text of each into your next reply:
If you are using Symantec's (which runs even in Safemode):
1. Start Norton AntiVirus. If Norton AntiVirus is installed as part of Norton SystemWorks or Norton Internet Security, then start that program. 2. Click Options. If you see a menu, click Norton AntiVirus. 3. In the left pane, click Script Blocking. 4. In the right pane, uncheck Enable Script Blocking (recommended). 5. Click OK.
I got the scan log from the DDS but I can't attach it because the file type isn't supported. I could email it possibly. Also, I noticed a lot of new threads say their PC has been hijacked. I know my scanner found a virus but could I be hijacked?
DDS (Version 1.0.1) - NTFSx86 Run by Brandon at 16:40:32.22 on Wed 12/17/2008 Internet Explorer: 7.0.6001.18000 Microsoft® Windows Vista™ Home Premium 6.0.6001.1.1252.1.1033.18.3069.1921 [GMT -8:00]
Are you able to run MBAM in Safemode? If not, restoring to factory settings just may be something to consider. I've been having a problem posting on these forums without getting errors, so if I don't reply, that is why. Hopefully, Dell will fix the posting problem soon. Perhaps another helper will pick up this thread if I am unable to reply.
I also noticed the scan froze on two different registry keys on two scans. They were in a place called HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall
I don't know if that helps at all. I couldn't find the specific folder.
I just tried a quick scan again. It froze after 29 seconds at 12160 files which has happened before. The computer restarted on its own. Is it a guarantee restoring to factory settings will cure it or will the restored factory copy of Vista be corrupted too? Thanks a lot. I don't have too much to lose by resetting to factory.
BRANDONN2008
22 Posts
1397
0
Posted December 12th, 2008 20:00
I can't download it. It loads much slower than it should, and when it finishes, the dialog box freezes so it doesn't finish downloading to my desktop. Running it instead of saving it didn't give enough time because it froze mid installation.
Here are 3 error messages that popped up when things really got bad:
Error message 1: eplorer.exe-Application Error
The instruction at 0x75f686b4 referenced memory at 0x7350b938. The required data was not placed into memory because of an I/O error status of 0xc0000056
Error message 2: ::{26EE0668-A00A-44D7-9371-BEB064C98683}
::{26EE0668-A00A-44D7-9371-BEB064C98683} application not found
Error message 3: Logon process has failed to create the security options dialog
Failure-Security options
Also, it freezes in safe mode