UNSOLVED

markatwork

updated

21 years ago

0

19679

August 2nd, 2005 17:00

ITA 7.0 help

Hi,

Can anyone tell me where the documentation for ITA 7.0 can be found? All I seem to find are whitepapers that don't give me the information I need.

Specifically I need to say, push out the latest BIOS update to multiple desktop machines (all the same hardware). But I can't seem to find out how to do it in ITA, and can't find the docs.

Any ideas?

Mark.
  • SandyBryce

    32 Posts

    753

    0

    Posted August 3rd, 2005 08:00

    Remote BIOS Flash

    You can use IT Assistant's Manage Tasks option to create CLI commands.

    1. In IT Assistant, select Manage® Tasks.
    2. Right-click Command Line and click New Task to display the Task Creation Wizard.
    3. You can use the Task Creation Wizard to create a new task. Click Help in this wizard for more information.
      1. In the Task Creation window, select Remote Client Instrumentation, which allows you to execute OMCC CLI commands remotely.

    You must also specify a task name and, optionally, a brief description of your task in the Task Creation window.

    enter the Argument below

    system cim action=flashbios ipaddress=$IP username=$USERNAME password=$PASSWORD authenticationlevel=packet biosfile=\\servername\GX260A09.hdr

    The BIOS image file must be accessible from the remote client system, which means that the biosfile argument must be presented as the full path to the image file as seen from the client. The user who runs the BIOS update must have read privileges to the location where the image is stored.

    To make the .hdr file download the bios.exe from dell, in dos type GX260A09.exe -writehdrfile
     
    Hope this helps :-)
  • 754

    0

    Posted August 3rd, 2005 09:00

    Hi,

    Thanks for your reply.

    Is there no simpler way to deploy updates than what you laid out below. Maybe I'm hoping for too much... but I was kinda hoping for a right-click / deploy update option...

    Do you know where I can find in-depth documentation?

    Mark.
  • SandyBryce

    32 Posts

    754

    0

    Posted August 3rd, 2005 09:00

    Once the Task is created, its really simple as you just click the systems you want to push the bios to and hit finish, however all the simple click options have been removed from ITA 7.0 you need to write a similar task to clear a Chassis Intrusion, it used to be a mouse click.... Dell are you listening make it simple again!!!!!
  • 754

    0

    Posted August 3rd, 2005 18:00

    OK, I'll bite,  Where do you find the info on writing the tasks?  I've looked at the references and see how to reboot, flash a bios, make the LED blink, etc but nothing for something like resetting the chassis intrusion.
  • 754

    0

    Posted August 4th, 2005 07:00

    Sandy,

    Thanks for the info!

    Mark.
  • 754

    0

    Posted August 4th, 2005 07:00

    Sandy,

    You certainly seem well informed on the subject... c'mon, share the goodies - where can we find the docs for all this?

    Mark.
  • SandyBryce

    32 Posts

    754

    0

    Posted August 4th, 2005 07:00

    It's no big deal, just open IT Assistant, click the help tab;

    Scroll down to- Tasks -Working with Tasks- Command Line Tasks - Remote Client Instrumentation CLI.

     

    Also just search the forums for any other tasks you might need, or post a request.

    Sandy
  • SandyBryce

    32 Posts

    754

    0

    Posted August 4th, 2005 07:00

     
    Chassis Intrusion Reset;
     
    Make sure that you are selecting Remote Client Instrumentation Command Line
    task.
     
    My exact command in arguments is:
     
    system cim action=setcim ipaddress=$IP username=$USERNAME password=$PASSWORD authenticationlevel=packet classpropertyvalue= Dell_SMBIOSsettings::ChassisIntrusionStatus:5
     
    all on one line. After you run that command on a machine, you have to refresh the status.
     

    Further Aurguments

    System Restart

    system cim action=restart ipaddress=$IP username=$USERNAME password=$PASSWORD authenticationlevel=packet

    System Shutdown
     
    system cim action=shutdown ipaddress=$IP username=$USERNAME password=$PASSWORD authenticationlevel=packet
     
    Remote CIM Set

    system cim action=setcim ipaddress=$IP username=$USERNAME password=$PASSWORD authenticationlevel=packet classpropertyvalue=dell_configuration::HDDPercentageThreshold:20

  • 754

    0

    Posted August 4th, 2005 11:00

    Great, thanks Sandy.  I'd seen how to do the command, it just hadn't clicked that I could put a settable CIM property there.
     
    Thanks again.
  • 77

    0

    Posted August 4th, 2005 11:00

    And following up to my own post, it should have been obvious.  I will claim a long night of 'puting, an early morning, and a lack of sugar and caffeine when reading it.

     

    Programmers axiom: Sleep - a totally inadequate substitute for coffee and sugar.