UNSOLVED

MikeMac1

updated

18 years ago

M

MikeMac1

2 Intern

•

292 Posts

0

2861

August 4th, 2008 08:00

Symmetrix Website

The PSE Lab in Hopkinton has taken on the task of creating a Symmetrix website for customers. This is similar to what already exists for CLARiiON https://support.emc.com/products/CLARiiONCX3.aspx . Looking for customer feedback on what you would like to see included on this website. Some of the categories that we are currently exploring are Hardware Maintenance, Installation and Configuration, Tools and Utilities, Features, and Security. Any suggestions/feedback would be greatly appreciated.
  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    1054

    1

    Posted August 4th, 2008 11:00

    Mike,

    can we have RSS feeds for that particular section of PowerLink? Right now there are generic RSS feeds but it would be nice to see when new content gets added to this particular site.
  • MikeMac1

    2 Intern

    •

    292 Posts

    1054

    0

    Posted August 5th, 2008 13:00

    I can see if that is possible.
  • bodnarg

    2 Intern

    •

    385 Posts

    1054

    1

    Posted August 6th, 2008 08:00

    What about a Performance subsite like they have on the Clariion with some information on tools and references to best-practice guides? I know we won't get benchmarks or any hard data, but even a consolidated grouping of some of these guides would be a good start for many.
  • MikeMac1

    2 Intern

    •

    292 Posts

    1054

    0

    Posted August 8th, 2008 05:00

    Excellent idea, we will look into adding what we can for performance.
  • RRR

    6 Operator

    •

    5739 Posts

    1054

    0

    Posted August 22nd, 2008 11:00

    What about examples if you're looking for your first Symm and don't know where to begin.

    I know, I know... call EMC and they will help, but then again, most tech guys want to dig into this themselves first (like me) before even considering calling a sales guy... any sales guy that is.

    For example: I'm comparing CX4-960 to a somewhat comparible DMX4 ATM and I don't really know what to look for.
  • xe2sdc

    6 Operator

    •

    2831 Posts

    1054

    0

    Posted August 22nd, 2008 12:00

    Just ask .. I'm neither a salesman nor an human being .. I'm Hal Del Corno ;-)
  • AJK3

    2 Intern

    •

    108 Posts

    1054

    0

    Posted August 25th, 2008 04:00

    definitely will help a lot.. great idea.
  • MikeMac1

    2 Intern

    •

    292 Posts

    1054

    0

    Posted August 28th, 2008 12:00

    What about examples if you're looking for your first
    Symm and don't know where to begin.

    I know, I know... call EMC and they will help, but
    then again, most tech guys want to dig into this
    themselves first (like me) before even considering
    calling a sales guy... any sales guy that is.

    For example: I'm comparing CX4-960 to a somewhat
    comparable DMX4 ATM and I don't really know what to
    look for.


    Not sure if I follow where you are coming from. If your talking about Symm information for potential customers I don't believe that they will have access to the website because they probably don't have access to PowerLink. If your talking about existing EMC customers that have access to PowerLink, then yes we are looking at putting product guides on the website but not comparison guides.
  • MikeMac1

    2 Intern

    •

    292 Posts

    909

    0

    Posted September 12th, 2008 12:00

    bumping - still looking for idea's/suggestions
  • RRR

    6 Operator

    •

    5739 Posts

    871

    0

    Posted September 15th, 2008 02:00

    At the time I wrote that we (ASN partner) were busy writing a proposal for a customer and the DMX came into view. We tried getting help from EMC, but I don't know what exactly happened, but we didn't get a lot of help on the DMX questions we had, so we now configured a Clariion CX4-960 instead. Too bad, since this customer is already a valued EMC customer and IMHO a DMX would be possible.
    And that's why I thought it would be a great idea to have something online to put a config together without help from EMC. And with that config I could get in touch with EMC to get that config confirmed.