How to create Raid groups and volumes on symmetrix?
Can any one please tell me how to create RAID groups, volumes on symmetrix DMX series array? I couldn't find a right guide about how to configure RAID, volumes, extra....on Symm array. So, please suggest if there any documents available.
Note: I have product guide and solution enabler command guides.
have you had a chance to download Solutions Enabler guides? You will learn that many concepts you are used to in Clariion do not apply in the Symmetrix world.
With a CX you work at physical drive level, binding a set of volumes to a given protection. When you have a big pool of available RAID protected space you can create luns that later will be presented to the hosts.
With a DMX you work at a logical level. You ask the code to create logical devices (symdevs) with a given protection. It's up to the code to spread them as better as possible, accordingly to rules that ensure data protection.
You don't need to define "raid groups". You simply create RAID protected symdevs. The code will use its own rules when picking up the space from the disks in your backend.
Have a look at "symconfigure" command and all available options when creating new devices.
I was under the impression that raid groups should be created initially(either 3+1 OR 7+1 for Raid 5) by CE while configuring the symm and later sym devices will be created on those appropriate raid groups based on protection type. even if the code chooses the disks for creating sym devices for the given raid protection, thereafter those set of disks will always be used for that particular raid protection, right ?
symms use hypers (units that make up a LUN) and give flexibility of creating protected luns using those.
so a given set of disks can have some hypers belonging to a RAID5 device/lun as well as Mirrored device/lun.
compared to CLARiiONs, in symm world, the hypers are created first and volumes later (using them) and on CLARiiONs, hypers are created when volumes/luns are created.
the remaining space left on the hypers will be used for subsequent raid 5 sym devices correct ? for an instance, if i used 4x16gb hypers , which are already cut via bin file by CE, to create 10gb raid 5 sym dev, the remaining 54 gb will be used for subsequent raid 5 sym devices?
so Raid 5 (3+1) means 3+1 hypers that will be used to creating raid 5 sym devices OR we create hypers on 3+1 disks (created with raid 5 protection) and those hypers will be used for creating raid 5 sym dev by the code?
if vertical columns below represent a disk and each character represents a hyper...
X X X X X
Y Y . . .
A A A A A
. . B B .
here the five disks above have two 4+1 RAID volumes (X and A) and two mirrored volumes (Y and B). and "." are unutilised hypers.
someone correct me if wrong but which RAID (5+1/8+1...) you can use in a box depends on how the disks are connected at the backed. so you may not be able to create both R5+1 and R8+1 on a single machine.
dynamox
11 Legend
•
20419 Posts
•
87439 Points
520
1
Posted April 26th, 2008 08:00