research Open Replicator

They have many EMC boxes which going to be replaced with VMAX. The 30% of the data would be moved to Hitachi and remaining to EMC VMAX at later stage. My queries are only for Hitachi....... Any thoughts would definitely help!

should you be going to Hitachi forum asking for help to migrate from competitor storage array ?

VMware converter , essentially P2V ?

OR for Array based. Thank you!

If i need to move from physical (source) to VM-ESX (target)? Any thoughts! Thx

When you go out from EMC to Hitachi, its better to check with Hitachi for accurate support.

Otherwise, I would suggest using host based migration like Powerpath Migration Enabler (PPME) which is more time consuming and performance worried than the array based as it consumes host resources. The benefit, with PPME you can switch between source (EMC) and target (Hitachi) before you run the "commit".

Hello pmenon,

Welcome to EMC community!

EMC OR hot push can be used for data migration from EMC DMX3 to Hitachi (you can check the support matrix for Hitachi model).

PPME might be a good option only IF Powerpath can manage your Hitachi devices. Kindly refer to support matrix for latest version of Powerpath. If not then EMC Open migrator can do the job.

 
Hope that helps

Mohammed Salem

PPE sends data via FC during migration and any licensing required?

Thanks guys for quick response.. It really helps!

PPME is free of charge if you currently pay for licensed version of PowerPath.

As someone mentioned, you have to check hitachi community.. but alas that doesn't exist.

1. Hitachi arrays support storage virtualization, which is the optimal way to migrate.

2. Open Replicator

3. PPME

If you are customer, you can negotiate migration as part of purchase. Hitachi will land something called USP VM or equivalent which will be used for migration.

Are migrating to VSP?