Issue: I need enough unprotected (or mirrored) BCVs so that we have the ability to perform meta expansions on our sym, a DMX-4 running 5772.85.
Configuration: All drives in the array are configured as RAID5 (3+1). A standard hyper size is used on all drives for building metas: 31.6GB. The remaining space on the drives is filled with 5.0GB hypers. There are 160 146GB drives for production, 64 300GB drives for BCVs and clones, and 68 500GB drives for clones. These three different drive types correspond to three different disk groups and the hypers are spread across all the drive in each disk group.
Problem: Since all of the drives are configured as RAID5 (3+1) and hypers are created on every drive I need to delete devices and break the RAID configuration on enough drives to create the free space necessary to allow us to perform meta expansions. My concern is that I will need to delete some existing metas in use to free up enough drives required for meta expansion BCVs.
Since symconfigure can't leverage RAID5-BCVs while expanding your metas or converting them, you have to choose between Unprotected and 2-Way-Mir BCVs.
In my experience I never had issues with unprotected BCVs, however it's always possible that a drive fails during a meta expansion, leaving you without either the original or the BCV copy of your beloved data.
What do you think I'd suggest you ??
Please note that EMC always suggests to make a backup of your beloved metavolume before expanding/converting it via symconfigure. If you are brave enough, you can try without a backup and with unprotected BCV. And if something does not work as expected, remember that you (as any other storage administrator) always have an open ticket for a flight to Caracas in your pocket
1) buy drives and configure BCV on them 2) use your favourite spreadsheet and throw in "symdisk -sid xxx -v -hypers -gaps list" output.. Now try to find "adjacent" hypers that you may delete .... And knock wood
that's what i was thinking ...i remember i had one situation where i could not do that because i ran out of mirror positions, so i think i had to either split my SRDF link or my R1-BCV ...don't remember exactly, but something check.
xe2sdc
6 Operator
•
2831 Posts
448
0
Posted June 3rd, 2008 02:00
Since symconfigure can't leverage RAID5-BCVs while expanding your metas or converting them, you have to choose between Unprotected and 2-Way-Mir BCVs.
In my experience I never had issues with unprotected BCVs, however it's always possible that a drive fails during a meta expansion, leaving you without either the original or the BCV copy of your beloved data.
What do you think I'd suggest you ??
Please note that EMC always suggests to make a backup of your beloved metavolume before expanding/converting it via symconfigure. If you are brave enough, you can try without a backup and with unprotected BCV. And if something does not work as expected, remember that you (as any other storage administrator) always have an open ticket for a flight to Caracas in your pocket