Solved!
Go to SolutionSupport assist os recovery hangs at the install point
I have been trying to let the support assist recovery to install for the last two days. I click install and the whole support assist window goes grey and says it is validating but it never goes any further. I am not sure what to do ugh
20901
0
Posted June 30th, 2020 08:00
This worked perfectly
Thank you !
20879
0
Posted June 30th, 2020 13:00
We had a similar case just come into our L3 Escalation queue. I created a defect with the drivers team to investigate.
20685
0
Posted July 19th, 2020 21:00
I am already running the latest version.
20459
1
Posted August 15th, 2020 12:00
The issue has been fixed? I don't think so. After 2 days of use, on my very first use of SupportAssist, using this version 3.6, SA hung itself.
I was shown 7 updates to install. I selected the smallest 4. Worked okay on the first three, then hung on the fourth. After 45 minutes, still installing. So I clicked on Cancel. It then showed "Cancelling" on all 4 even though the first 3 had already installed, supposedly. Then it hung on "Cancelling". Seriously?
No choice, I x'ed out of SA. And then came here. And I see all these threads going back years of people posting problems with SA hanging, just not functioning. I read instructions to uninstall SA, delete various folders, then reinstall SA.
Why would I reinstall something that plainly doesn't work? Wouldn't work the first time I used it? And has been causing problems for years?
20068
0
Posted September 22nd, 2020 19:00
Same here. I have version 3.7. Hangs at a full "installing" bar and never completes. I lose patience, close, reopen then retry install and it instantly says "failed". Restart the computer, reopen SA, try again, get exact same rigmarole .... I'm through wasting my time with this garbage.
It's not the first time, tried to install nvidia driver update with it once, always failed to install after wasting loads of my time. Had to use nvidia official site to install the driver update (which installed flawlessly in less than 2 minutes btw).
Very very poor tool the SA is. I won't be using again ....
12225
0
Posted March 26th, 2021 17:00
So my computer screen got a bit broken, but only about a centimetre squared. I don't think this has affected the software/hardware, but about two days after it happened, (note: the two days before it happened, the computer was completely functional) It comes up with a white screen saying stuff about a "SupportAssist | Pre-boot System performance Check. and on the same screen in the middle, it also shows my computer model, some stuff listing System BIOS, Service tag, Version, and Touch. Below that, it shows a "system scan in progress" , with a bar underneath. once the bar is finished loading, i hit continue because i think my computer might need a restart. next up, it shows a blue screen with a green bar. this green bar has been stuck at about 20% for the past half hour. can anyone help?
garioch7
7 Practitioner
•
318 Posts
•
1621 Points
20911
2
Posted June 30th, 2020 04:00
@Liam68
Have you tried rebooting your computer, and then disabling your anti-virus/anti-malware application(s)?
It/They sometimes interfere with installing updates and components.
I hope this helps. Have a great day.
Regards,
-Phil