OK...go to start,control panel, system, hardware,device manager, secondary IDE Channel, advanced settings, view down to transfer mode, device 1 (note the first device..your initial HDD is device 0, is ticked (device 1 the second in line)as DMA transfer mode.
Hope this helps and if not...post back.
Dave
I gotta dwell on this a bit 'cause as I have three Dell Dims on hand...alas,none is anywhere near what you have.
I can suggest that you may wish to disable the sounds..bells and whistles, in your (assumption) WXP operating system with onboard sound as opposed to a PCI sound card
One other thing you may wish to try is to reboot after the change in the device manager relative to PIO vs. DMA.
Hello, I believe I have changed it and it works a little better, but I can still make it mess up. Under the primary IDE tab, device 0's transfer mode is "DMA if available" and device 1's transfer mode is "DMA if available" and the actual mode is Ultra DMA Mode 5 for both. However, under Secondary IDE tab Device 0's transfer mode is "DMA if available, but the current transger mode is PIO mode, and I can't change it. Under Device 1's transfer mode is DMA if available and current is not applicable.... sooooo all this just confuses me. To me it seems as if under the secondary IDE channel, it is looking for DMA, but can't find it..... or maybe I have it all wrong. I appreciate the help. I certainly need it. Thanks.
Hello... just seeing if anyone may have come up with a solution. It is working ok for now. I just can't do anything else with the drive while I am looking at pictures or listening to music.... which kinda stinks cause I always want the music going when I'm on the computer. PLEASE let me know if anyone has a solution.
wave_dave
111 Posts
198
0
Posted May 26th, 2005 16:00